Samsung SCB-3001 User Manual - Page 8

Installation Lens The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Notes • T o use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. • K eep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. When Using Auto Iris Lens 1. Strip the insulation of the auto iris lens cable 8mm from the end. approx. 8mm 2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length. approx. 2mm 3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the connector pin of the plug. Pin No. No.1 Pin No.2 Pin No.3 Pin No.4 Pin DC Damping Damping + Drive + Drive - LENS VIDEO Red (power) NC No. 3 Pin No. 1 Pin White (video signal) Black (GND) Lens cable connector No. 4 Pin No. 2 Pin COLOR CCD CAMERA 14 User Guide 4. F it the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 5. S et focus of camera using Back Focus Control Lever of camera side after combining Auto Iris lens. Back Focus Control Lever When Using a C/CS-Mount lens Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a simple modification is required. • When Using a CS Mount Lens Remove the protective glass cover at the front of this product and turn the CS-Mount Lens clockwise to install it. And set focus of camera using Back Focus Control Lever of camera side after combining CS-Mount lens. C-mount adapter COLOR CCD CAMERA 15 User Guide