Samsung SCC-C9302F User Manual - Page 21

CAMERA MENU Organization BW This is the IR Filter OFF mode, black-and-white (with the same sensitivity as a black-and-white camera). Select BW... and press [Enter] and the BW submenu will appear. You may determine to sent out BURST signals by ON or OFF setting in this submenu. E ❖ WHITE BAL will be marked --- so that setup is unavailable. ❖ In AUTO mode, AGC menu will be displayed as "---" and you cannot change it manually, CAMERA ID ON... (BW) IRIS ALC... SHUTTER OFF AGC LOW WHITE BAL --- FOCUS MODE ONEAF ALARM SET ... PRESS THE COLOR/BW PRIVACY SPECIAL BW... ON... ... ENTER BUTTON. BURST ON PRESET EXIT ... QUIT RET 40 AUTO Depending on illumination, it is automatically switched to the COLOR or BW mode. In the poor illumination environment, turns IR Filter off to convert to the Black-and- White mode for better sensitivity and in the good illumination environment, turns it on to convert to the COLOR mode for worse sensitivity. Select AUTO and press [Enter] and the AUTO BW submenu will appear to control the BW level. Depending on ON E or OFF, the BURST signal may output or no. CAMERA ID IRIS SHUTTER AGC WHITE BAL FOCUS MODE ALARM SET COLOR/BW PRIVACY SPECIAL PRESET EXIT OFF ALC... OFF --ATW1 ONEAF ... AUTO... ON... ... ... QUIT (AUTO) PRESS THE ENTER BUTTON. BURST LEVEL DURATION RET ON LOW S ---I--- L - BURST ON : The color burst signal is output together with black and white composite video signal. - BURST OFF : The color burst signal is not output. - LEVEL :You can set the brightness level that changes from COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH. - DURATION : Set the HOLDING time for switching between COLOR and BW mode depending the changes in the amount of light. You can set the HOLDING time to 10sec (S), 30sec, 60sec, or 300sec( L). In AUTO mode, AGC will operates in high speed mode, and you cannot change it manually, as it is indicated by "---". 41