Samsung SCC-C9302F User Manual - Page 24

CAMERA MENU Organization ZOOM SPEED : Use [Left, Right] key in the ZOOM SPEED menu to set the speed as follows. E ZOOM SPEED 1 : About 17Sec. from X 1 to X 12(Slowest) ZOOM SPEED 2 : About 10Sec. from X 1 to X 12(Slow) ZOOM SPEED 3 : About 6Sec. from X 1 to X 12(Fast) ZOOM SPEED 4 : About 3Sec. from X 1 to X 12(Fastest) D-ZOOM : Sets up the Digital Zoom magnification ratio up to x10. RS-485 : Sets up RS-485 Communication Protocol, Address, and Baud Rate. (OTHER SET) LANGUAGE ZOOM SPEED DIGITAL ZOOM RS-485 SYSTEM INFO V-SYNC DISPLAY ZOOM RET ENGLISH 1 OFF ... ... INT ON (RS-485) PRESS THE ENTER BUTTON. PROTOCOL BAUD RATE ADDRESS RET SAMSUNG 9600 0 SYSTEM INFO :You can confirm settings related to the RS-485 communication, product serial number, and the software version. 46 (OTHER SET) (SYSTEM INFO) LANGUAGE ENGLISH ROM VER 0.207 ZOOM SPEED 1 EEP VER 0.208 DIGITAL ZOOM OFF PROTOCOL SAMSUNG RS-485 ... SYSTEM INFO ... V-SYNC INT PRESS THE ENTER ADDRESS TYPE BAUD RATE 0 RS-485, HALF 9600 E DISPLAY ZOOM ON BUTTON. SERIAL NO 000000000000000 RET RET V-SYNC : INT shall be selected to use internal synchronization. LINE... is used to synchronize several camera phases for the multi camera operation by using an external signal(AC signal). As there may be a slight deviation between sets, adjusts PHASE to overcome this handicap. When you use AC power source, V-SYNC is available. Select LINE... and press [ENTER] and the PHASE control submenu will appear. The PHASE control ranges from -106H to +106H as for NTSC and from -138H to +138H as for PAL. (OTHER SET) LANGUAGE ZOOM SPEED DIGITAL ZOOM RS-485 SYSTEM INFO V-SYNC DISPLAY ZOOM RET ENGLISH 1 OFF ... ... LINE... ON (LINE LOCK) PRESS THE ENTER BUTTON. PHASE RET (-308)I-------- ❖ When a DC power is supplied, V-SYNC menu will be displayed as --- and you cannot make any settings. 47