Samsung SDP-950STA Quick Start Guide - Page 1

SDP-950DXA/STA Quick Start Guide BASIC OPERATIONS The Samsung SDP-950DXA/STA provides control of the basic operations on the front panel of the Digital Presenter. Please note that you can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button to access the menu. Advanced features are found on both the remote and menu commands via the mouse. Turn on the main power switch of the document camera. After the boot-up screen, the presenter will perform an automatic white balance or "Color Adjustment." Tip: Make sure there is no subject matter on the display surface to affect white balance. Printed text on white paper is OK. ROTATE (DXA Only) Use the ROTATE button to electronically "flip" your portrait documents for sharper results and better display. Press the ROTATE button once to rotate the document in 90°, 180°, 270°, 0°increments. NEGA/POSI (STA Only) Press the NEGA/POSI conversion button. Each time you press the button, Nega or Posi appears alternately on the screen. AF Pressing the AF button will activate an auto focus adjustment at any time. Manual focus is available on the remote or menu via the mouse. Tip: Use the mouse and the built-in menu command for extremely accurate manual focus control...especially good for 3dimensional subjects when at maximum zoom. IRIS The IRIS buttons (brightness control) are used to lighten or darken the overall image for the desired result. SDP-950DXA INT/EXT Use this to switch between internal or external images. TXT/IMG Press the TXT/IMG button to control the sharpness of the output image. TXT : For a material with mostly words. IMG : For a material with mostly image. ZOOM Press the ZOOM or ZOOM or enlarge the image size. settings to reduce Tip: Make sure you're not moving the subject during auto focus. If the subject is blurry, press the AF button to re-focus. Note: If you save an image when in the Digital Zoom mode, the SDP-950DXA/STA will only save the maximum optical zoom image (12x) to maintain overall image quality. FREEZE Use the FREEZE button to "hold" any image on the screen while you change your subject or to freeze a subject in any position. To release the FREEZE mode, press the FREEZE button again or EXIT button on the remote control. Tip: The FREEZE button is used to freeze a live image or divided image in order to activate the Draw menu command for annotation. LAMP Select a proper lighting source with the LAMP button of the presenter. Pressing the LAMP button turns the upper lamp on or off. Tip : Use the upper lamps for documents and other subjects. Use the built-in Lightbox to illuminate overheads, X-rays, and slides. INT : to view the image from the SDP-950DXA/STA. EXT : to view the VGA output from another source such as a personal computer connected to the VGA input of the presenter. AWC For automatic color adjustment, press the AWC button. Tip: For best results, only activate AWC with a white surface under the lens. www.samsungpresenter.com SAMSUNG TECHWIN CO.,LTD.