Samsung SL-K7600LX User Guide - Page 258

Understanding display messages Message Replace with new imaging unit Replace with new fuser unit Replace with new Transfer roller Replace with new [tray number] pickup roller Scanner locked or another problem occurred Meaning Suggested solutions The indicated imaging unit has almost reached its estimated imaging unit lifea. Replace the imaging unit for the best print quality when this message appears. Using a imaging unit beyond this stage can result in printing quality issues (see "Replacing the imaging unit" on page 231). The life of the fuser unit Replace the fuser unit with expires totally. a Samsung-genuine fuser unit, call for service. The life of the transfer roller expires totally. Replace the transfer roller with a Samsung-genuine transfer roller, call for service. The life of the tray pickup roller expires totally. Replace the tray pickup roller with a Samsunggenuine pickup roller, call for service. The CCD (Charged Couple Device) lock has been locked. Unlock the CCD lock . Or turn the machine off and back on again. If the problem persists, call for service. Message Meaning Suggested solutions Scan System Failure [error number]:Turn off then on There is a problem in the scan system. Turn the machine off and back on again. If the problem persists, call for service. Sensor Failure: [error number]. Turn off then on. Call for service if the problem persists There is a problem in the sensor system. Turn the machine off and back on again. If the problem persists, call for service. Shake [color] toner cartridge Small amount of toner • You may temporarily is left in the indicated increase the printing cartridge. quality by redistributing the toner (see "Redistributing toner" on page 226). • If the problem persists, call for service. The clock became initial The time setting of Set the time setting in time. Set a time again machine is initialized. Machine Setup. The IPv4 address assigned to wireless LAN conflicts with that of other system. Check it The IPv4 address is used elsewhere(wireless LAN). Check the IPv4 address or obtain a new IP address. The IPv6 address assigned to wireless LAN conflicts with that of other system. Check it The IPv6 address is used elsewhere(wireless LAN). Check the IPv6 address or obtain a new IP address. 10. Troubleshooting 258