Samsung SP-D400S User Manual (user Manual) (ver.1.0) (English) - Page 10
○:Light is Off - battery
View all Samsung SP-D400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Power Cable Sold separately D-Sub Cable Remote Control/ 1 Batteries (Not available in all locations) Cleaning Cloth LED Indications ●:Light is On ◐:Light is Blinking ○:Light is Off STAND LAMP BY TEMP Information ● ○ If you press the POWER button on the remote control or projector, the screen ○ appears within 30 seconds. ● ● ○ The projector is in normal operating condition. ● ◐ This state appears when the projector is preparing an operation after the POWER button ○ on the projector or the remote control has been pressed. ○ ◐ The POWER button is pressed to turn off the projector, and the cooling system is in ○ operation to cool off the inside of the projector. (Lasts for about 1 minute and 30 seconds) ◐ ○ Refer to Action 1 below if the cooling fan inside the projector is not in normal operation ◐ condition. ○ ◐ Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed ◐ properly. ○ ○ Power is turned off automatically when temperature inside of the projector goes beyond ◐ the control limit. Refer to Action 3. ● ◐ ◐ A problem has occurred when operating the DDP IC in the product. Refer to Action 4. ◐ ◐ ◐ A problem has occurred with the operation of the lamp. Refer to Action 5. ● ◐ ● The lifetime of the lamp has expired. Refer to Action 6. ◐ ◐ ○ The memory in the product is not operating normally. Contact a service center. ◐ ◐ ● The power for the product is not operating normally. Contact a service center. ◐ ● A problem has occurred when operating the color wheel in the product. Refer to Action ◐ 4. Clearing Indicator Problems Classification State Measures