Samsung SP-H800 Owners Instructions - Page 25

CONNECTING TO VIDEO EQUIPMENT Connecting to the Digital TV Receiver Rear side of Projector Connections and Source Setup Connecting to Video Equipment PC Video Cable DVI Cable or Digital TV Receiver (Set-Top Box) Antenna Input Rear Connection Component Cable 1 Connect antenna cable to antenna signal input terminal of the receiver. Connect the COMPONENT 1 (Y/Pb/Pr) or COMPONENT 2 (Y/Pb/Pr) input port at the back of the projector to the Component port at the back of the digital broadcast receiver with the component cable. If the digital broadcast receiver provides a DVI or PC output port, you can connect a digital broadcast receiver using the [DVI] or [PC] input port of the projector. 3 When finish connecting the devices, connect the power of the projector and the DTV receiver. 2 Viewing the picture COMP.1 1 COMP.2 on the projector and press the COMP.1 1 Turn button to select Component1. Press the COMP.2 button to select 2 Component2 if COMPONENT2 is connected. If the receiver is connected to DVI or PC port, press the DVI or PC button to select DVI or PC respectively.