Samsung SP-P410ME Owners Manual - Page 45
Troubleshooting, 5-1 Before Requesting Service
View all Samsung SP-P410ME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5 Troubleshooting 5-1 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. Symptoms Installation and Connection No Power. I want to install my projector on the ceiling. External Source can not be selected. Menu and Remote Control Remote control does not work. I cannot select a menu. Troubleshooting Check the power cable connections. The ceiling installation support is sold separately. Contact your local product distributor. Be sure that the connection cable(s) (video) is properly connected to the proper port. If the device is not connected properly, it can not be selected. Be sure that the proper external source is selected. Check the remote control battery. If there is something wrong with it, replace it with a new battery of the recommended size. Be sure to aim the remote at sensor on the back of the unit and at a distance of no more than approximately 23 feet(7 m). Remove any obstacles between your remote control and the product. Direct light from 3-way light bulbs or other lighting devices on the remote sensor of the projector may affect the sensitivity and cause the remote control to malfunction. Check if the remote control battery compartment is empty. Check whether the LED indicator on the top of the projector is turned on. Check if the menu is displayed in gray. A gray-colored menu is unavailable. Troubleshooting 5-1