Home » Samsung Manuals » Flat Panel Televisions » Samsung TX-P1634 » Manual Viewer

Samsung TX-P1634 User Manual (user Manual) (ver.1.0) (English) - Page 18

Connecting a VCR, your TV may be different.

Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.4). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different. 2.5 CHAPTER TWO: INSTALLATION

Section	Page
Warning! Important Safety Instructions	2
Important Safety Information	3
CO N T E N T S	6
CO N T E N T S 2	7
Chapter 1: Your New TV	8
List of Features	8
Familiarizing Yourself with The TV	9
F ront Panel Buttons	9
Side Panel Jacks	9
Rear Panel Jacks	10
Remote Contro l	11
Chapter 2: Installation	14
Connecting VHF and UHF Antennas	14
Antennas with 300-ohm Flat Twin Leads	14
Antennas with 75-ohm Round Leads	15
Separate VHF and UHF Antennas	15
Connecting Cable TV	15
Cable without a Cable Box	15
Connecting to a Cable Box that Descrambles A l l C h a n n e l s	16
Connecting to a Cable Box that Descrambles Some Channels	16
Connecting a VCR	18
Connecting a Camcorder	19
Connecting a DVD Player (Option)	19
Installing Batteries in the Remote Control	20
Chapter 3: Operation	21
Turning the TV On and Off	21
Viewing the Menus and On-Screen Displays	21
Viewing the Menus	21
Viewing the Display	21
Selecting a Menu Language	22
Memorizing the Channels	23
Selecting the Video Signal-sourc e	23
Storing Channels in Memory (Automatic Method)	24
Adding and Erasing Channels (Manual Method)	25
Changing Channels	26
Using the Channel Buttons	26
D i rectly Accessing Channels	26
Using the PRE-CH Button to select the Previous Channel	26
Adjusting the Volume	26
Using Mute	26
Setting the Clock	27
Customizing the Picture	28
Using Automatic Picture Settings	29
Using Automatic Sound Settings	30
Viewing a VCR or Camcorder Tape	31
Chapter 4: Special Feature s	32
Customizing Your Remote Control (TXN2022)	32
Setting Up Your Remote Control to Operate Your VCR or DVD	32
VCR Codes	33
Setting Up Your Remote Control to Operate Your Cable Box	34
Cable Box Codes	34
Fine Tuning Channels	35
Changing the Screen Size	36
Using the Surf Feature	37
Setting the On/Off Timer	38
Setting the Sleep Timer	39
Sound Features	40
Choosing a Multi-Channel Sound (MTS) Soundtrack	40
Extra sound settings (Turbo Sound, or Surro u n d )	41
Viewing Closed Captions	42
Using the V- C h i p	43
Setting Up Your Personal ID Number (PIN)	43
How to Enable/Disable the V- C h i p	44
How to Set up Restrictions Using the “TV guidelines”	44
How to Set up Restrictions using the MPAA Ratings: G, PG, PG- 13, R, NC-17, X	46
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)	47
Chapter 5: Tro u b l e s h o o t i n g	48
Identifying Problems	48
AP P E N D I X	49
Cleaning and Maintaining Your TV	49
Placement	49
Liquids	49
Cabinet	49
Temperature	49
Using Your TV in Another Country	49