Samsung UF-130DX Software Users Guide - Page 12

Running Samsung Digital Presenter Program 1. Make sure that your Samsung Digital Presenter is connected to the PC and both are turned on. 2. Double-Click the 'UF130 USB Viewer' icon (automatically placed on the Windows desktop when you install). You can also select Samsung Digital Presenter program by clicking [Start] → [Program] → [UF130 USB Viewer] → [UF130 USB Viewer]. 3. Samsung Digital Presenter View Panel and Control Panel are opened. 4. You can watch live images what presenter output, and you also control this images using control panel. ✔ Note : • Samsung Digital Presenter program does not run if the Presenter is not connected to the PC or not turned on. • Screen Full and Full mode is fit to 1280x960 or 1280x720 resolution according to display mode. • If the whole view of the Samsung Digital Presenter View Panel dose not appear, check your PC resolution. (According to your display mode you need width 1024, height 720 or higher resolution on PC.) Open the [display setting], and select width 1024, height 720 or higher resolution. ✔ Caution : • While viewing, capturing or printing images on the program or TWAIN Driver, do not turn off power of the presenter or remove the USB cable off the PC. It may cause the presenter or the PC to make trouble. 10