Samsung UN40H5203AF Installation Guide Ver.1.0 (English)
Samsung UN40H5203AF Manual
 |
View all Samsung UN40H5203AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung UN40H5203AF manual content summary:
- Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 1
the illustration above. Hold the TV by its edges. Do not touch the screen. Included in this Box Remote Control Stand Parts and Cables or Remote Control Batteries (2 AAA) Base Stand Mount Also included •• User manual •• Regulatory guide Screws (x8) Cable Holder Power Cord IR Extender Cable - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 2
the top portion of the box to locate the stand or parts. 2 Lay the TV on a soft surface, screen side down. Use the packing material to protect the screen. 3 Fit the stand and mount together, making sure the notch on the mount aligns with the stand. [UH6203-QSG]BN68-06331A-00ENG.indb 2 2014-05 - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 3
4 Insert 4 screws and secure the Base to the Stand Mount. 5 Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV. 6 Insert 4 screws, and secure the stand to the TV. [UH6203-QSG]BN68-06331A-00ENG.indb 3 2014-05-09 1:01:25 - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 4
After you have connected all your external devices, plug the TV's power cord into the back of the TV. DO NOT plug it into a wall outlet until you have reached Section 6, Initial Setup. Connection panel on the back of the TV Internet Connect here with an Ethernet cable or wirelessly later during - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 5
4 Gear * Recommended Connections Blu-ray/DVD/Home Theater Connect your video player using an HDMI cable. Audio Connect a receiver/home theater using an optical audio cable. [UH6203-QSG]BN68-06331A-00ENG.indb 5 2014-05-09 1:01:26 - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 6
don't have an STB, skip this section. 1 Connect the IR extender cable to the TV's IR output connector. IR Out Connect the IR Extender Cable here. Place the transmitter end within 4 inches of the set-top-box's remote control sensor. 2 Position the transmitter end within 4 inches (10 cm) of the set - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 7
1 Plug your TV into a wall outlet. 2 Aim the Remote Control at the TV. 3 Press the TV button on the Remote Control to turn on the TV, and then follow the directions on the screen. To learn more about operating your TV and its Smart Features, see your TV's user's manual or launch the TV's built in - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 8
your connection to the device is correct. •• Perform a TV Self Diagnosis to identify the problem (MENU > Support > Self Diagnosis > Sound or Picture Test) •• Change the picture size. (Use the "P.SIZE" button on your remote.) Poor Picture Quality •• Select High Definition (HD) channels or programs - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 9
of Samsung Service. If you require any assistance with your TV, first try any of Samsung's helpful support options listed here. Troubleshooting •• For more quick solutions to common issues, see Troubleshooting and Maintenance in the user's manual. Built-in user manual •• A complete guide to your TV - Samsung UN40H5203AF | Installation Guide Ver.1.0 (English) - Page 10
Samsung Smart TV Setup Guide [UH6203-QSG]BN68-06331A-00ENG.indb 10 BN68-06331A-00 2014-05-09 1:01:28
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
1
Unpack
Taking the TV Out of the Box
•
Warning:
Do not touch the TV’s
screen when you take
it out of the box. Hold it
by its edges only. If you
touch the screen, you
can cause the TV panel
to crack.
•
Recommendation 1:
Two people should
remove the TV from the
box as shown above.
When removing the
TV, hold it by its edges
only. Do not touch the
screen.
•
Recommendation 2:
If only one person is
available to remove
the TV from the box,
remove it as shown in
the illustration above.
Hold the TV by its
edges. Do not touch
the screen.
Included in this Box
Remote Control
Remote Control
Batteries (2 AAA)
Stand Parts and Cables
or
Base
Stand Mount
Screws (x8)
Cable Holder
Power Cord
IR Extender Cable
Also included
•
User manual
•
Regulatory guide
[UH6203-QSG]BN68-06331A-00ENG.indb
1
2014-05-09
°° 1:01:23