Samsung UN40H5203AF Installation Guide Ver.1.0 (English) - Page 6

STB Control

Page 6 highlights

5 STB Control You can control your set-top-box or satellite box with the Remote Control. To establish control, you must first set up the IR extender cable. If you don't have an STB, skip this section. 1 Connect the IR extender cable to the TV's IR output connector. IR Out Connect the IR Extender Cable here. Place the transmitter end within 4 inches of the set-top-box's remote control sensor. 2 Position the transmitter end within 4 inches (10 cm) of the set-top-box's remote control sensor, pointing in the direction of the sensor. Make sure there are no obstacles between the transmitter end of the IR extender cable and the settop-box or satellite box. Any obstacles will interfere with the transmission of the remote control signals. 3 Finalize control of your set-top or satellite box when you run Initial Setup. [UH6203-QSG]BN68-06331A-00ENG.indb 6 2014-05-09 1:01:27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

5
STB Control
You can control your set-top-box or satellite box with the Remote Control. To establish
control, you must first set up the IR extender cable. If you don’t have an STB, skip this
section.
1
Connect the IR extender cable to the TV’s IR output connector.
Place the transmitter
end within 4 inches
of the set-top-box’s
remote control sensor.
IR Out
Connect the
IR Extender Cable here.
2
Position the transmitter end within 4 inches (10 cm) of the set-top-box’s remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of the IR extender cable and the set-
top-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
3
Finalize control of your set-top or satellite box when you run Initial Setup.
[UH6203-QSG]BN68-06331A-00ENG.indb
6
2014-05-09
°° 1:01:27