Samsung WA476DSHAWR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 16

Connecting the water and the drain

Get Samsung WA476DSHAWR/A1 PDF manuals and user guides View all Samsung WA476DSHAWR/A1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

installing your washer STEP 2 Connecting the water and the drain Connecting the water supply hose To avoid leaks, make sure that your water supply hoses CAUTION have rubber seals at both ends. Please make sure to use new water supply hoses to connect to the water faucets. Do not reuse old hoses. Only use new hoses when you install the washing machine. Old hoses could leak or burst causing flooding and property damage. When you initially install the washer, be sure to use a new CAUTION hose. Failing to do so may result in a water leakage or overflow and may damage your property. Hose-Connector Rubber Seals Do not connect multiple water supply hoses. This may CAUTION result in a water leakage and electric shock due to the water leakage. If the hose is too short, replace the hose with a longer, high pressure hose. 1. Connect the ends of the water supply hoses to the HOT and COLD faucets. Cold Hot 2. Tighten the fitting by hand until it is snug, then make two-thirds of a turn with a wrench. When you fasten the fitting, do not fasten it excessively or apply tape CAUTION or sealant to the faucet or water supply intake. This may damage the fitting. After you have connected the water supply hose to the faucet, ensure that it is connected correctly by pulling the water supply hose downwards. 3. Prepare a bucket for the water that will be emitted when you open the faucets connected to the two water supply hoses to remove any foreign substances from them. 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. The water supply hose connected to the HOT faucet must be CAUTION connected to the hot water supply intake and the water hose connected to the COLD faucet must be connected to the COLD water supply intake. 16_ installing your washer WA484DSHA-03050D_EN.indd Sec3:16 2012-07-02 3:39:20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
16_
installing your washer
STEP 2
Connecting the water and the drain
Connecting the water supply hose
To avoid leaks, make sure that your water supply hoses
have rubber seals at both ends. Please make sure to use
new water supply hoses to connect to the water faucets.
Do not reuse old hoses. Only use new hoses when you
install the washing machine. Old hoses could leak or burst
causing flooding and property damage.
When you initially install the washer, be sure to use a new
hose. Failing to do so may result in a water leakage or
overflow and may damage your property.
Do not connect multiple water supply hoses. This may
result in a water leakage and electric shock due to the
water leakage. If the hose is too short, replace the hose
with a longer, high pressure hose.
1.
Connect the ends of the water supply hoses to the HOT and COLD faucets.
2.
Tighten the fitting by hand until it is snug, then make two-thirds of a turn
with a wrench.
When you fasten the fitting, do not fasten it excessively or apply tape
or sealant to the faucet or water supply intake. This may damage the
fitting.
After you have connected the water supply hose to the faucet,
ensure that it is connected correctly by pulling the water supply hose
downwards.
3.
Prepare a bucket for the water that will be emitted when you open
the faucets connected to the two water supply hoses to remove any
foreign substances from them.
4.
Connect the ends of the water supply hoses to the water supply
intake connections at the back of the washer.
The water supply hose connected to the HOT faucet must be
connected to the hot water supply intake and the water hose
connected to the COLD faucet must be connected to the COLD
water supply intake.
installing your washer
Rubber Seals
Hose-Connector
Cold
Hot
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
WA484DSHA-03050D_EN.indd Sec3:16
WA484DSHA-03050D_EN.indd
Sec3:16
2012-07-02
3:39:20
2012-07-02
3:39:20