Samsung WA50R5400AV/US User Manual - Page 20
Installation, washer, and then hand tighten
View all Samsung WA50R5400AV/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Installation 20 English 1. Attach the water hoses to the hot and cold water taps, and then hand tighten the water hose fittings until they are tight. Then, use pliers to tighten the fittings by an additional two-thirds of a turn. To avoid damaging the fittings, do not overtighten them. 2. Pull the water hoses to check if they are firmly connected. 3. Put the other ends of the hoses into a bucket, and then open the water taps for 10 - 15 seconds to remove impurities. When done, close the taps. 4. Attach the water hoses to the hot and cold water inlets on the back of the washer, and then hand tighten the water hose fittings until they are tight. Then, use pliers to tighten the fittings by an additional two-thirds of a turn. NOTE If you do not want to use the hot water supply hose, insert the water intake cap onto the hot water supply intake. When you do a wash, press Temp. to select Cold.