Samsung WA50R5400AV/US User Manual - Page 50
Start/Pause Hold to Start, Hold to Start
View all Samsung WA50R5400AV/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Troubleshooting Problem • • • • Water is not supplied. • • • • • After a cycle, detergent remains in the automatic • dispenser. • • • • Vibrates excessively or • makes noise. • • • Action Make sure you press or tap Start/Pause (Hold to Start) after selecting the cycle and options. Make sure the water taps are open. Are the mesh filters in the water inlets clogged? Clean the mesh filters by brushing with a toothbrush. See page 46. Is the water supply cut off? If the water supply is cut off, close the tap and power off. Straighten the water supply hoses. Open and close the door, and then press or tap Start/Pause (Hold to Start). If the water pressure is low, it takes longer to start washing. If the water level is not as high as necessary or lower than expected, use the level selector to adjust the water level. Make sure the washing machine is running with sufficient water pressure. Make sure the detergent drawer is properly inserted. Remove and clean the detergent drawer, and then try again. Make sure the washing machine is on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. Make sure the washing machine is not contacting any other object. Make sure the laundry load is balanced. Make sure the laundry is spread evenly in the washing machine. Spread out the laundry evenly and start again. Make sure the space around the washing machine is free of objects. Humming is produced normally during operation. Objects such as coins can cause noise. Remove these objects from the washing machine after washing is complete. Troubleshooting 50 English