Samsung WEP170 Quick Guide (user Manual) (ver.1.0) (English) - Page 1
Samsung WEP170 Manual
View all Samsung WEP170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Start Guide Bluetooth Mono Headset WEP170 Get connected in 4 quick steps Charge your headset Put headset in pair mode Pair phone with headset Test and use Start hear Before using your headset Thank you for purchasing the Samsung Bluetooth Mono Headset WEP170, we hope you will be delighted with its operation. Take a moment before you get started to familiarize yourself with your new headset. Volume control buttons Indicator Light Microphone Multi-Function button Charging contact Check phone compatibility The Samsung Bluetooth headset WEP170 is compatible with most Bluetooth1 (see Glossary) phones that are compliant with Bluetooth version 1.1 or higher specification and support the headset and/or hands-free profile(s)2. Ensure that your phone has Bluetooth capability by visiting your phone manufacturer's web site. Check the accessories Make sure you have the following items with your headset: Bluetooth headset, Adapter, Manual NOTE: Your headset supports the headset and/or hands-free profile(s). Headquarters: 1301 East Lookout Drive Suite 150 Richardson, TX 75082 Internet Address: http://www.samsungusa.com Guide Number: GH68- Put your headset in pairing mode Before you can use your headset, you must pair it with your phone. 1 Ensure that the headset is off (see Turn headset on/off on the reverse side of this guide). 2 Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds). The indicator light flashes in blue as you press and hold the Multi-Function button. Continue holding down the button until the blue light is steadily lit. Trun on Bluetooth on your phone and pair with headset Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to a `Setup', `Connect', or `Bluetooth' menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP170 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key. If pairing was successful, the indicator light will flash in blue 10 times rapidly before going to flashing every 3 seconds. If unsuccessful, the light remains on, and you will need to re-attempt pairing. Charge your headset Samsung Bluetooth headset WEP170 uses a rechargeable battery that must be charged fully before you use the headset for the first time. 1 Plug the AC charging adaptor into the headset's charging socket. 2 Plug the AC adaptor into the electrical outlet. 3 Charge your headset until the red light turns to blue light on headset. 4 The unit will be fully charged in approxi mately 2 hours. 5 Remove AC charging adaptor from the headset. You are now ready to "pair" headset to your mobile phone. If the headset has already been paired to your phone, then you can begin using it. NOTE: The headset cannot be used while charging. Test and use Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the headset" on the reverse sied of this guide. 2 On your phone, make a call to the number you want. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. Using your WEP170 See Features and Functions Guide on the reverse side of this guide for information on using your WEP170.