Samsung WF365BTBGSF/A2 User Manual Ver.6 (English, French, Spanish) - Page 18
Test run
View all Samsung WF365BTBGSF/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
setting up your washer 4. Turn on the HOT and COLD water supply and check all connections at the water valve and the faucet for leaks. Cold printed Hot printed 5. Slide your washer into position. 6. Level your washer by turning the leveling legs in or out as necessary by hand or by using the wrench included with your washer. When your washer is level, tighten the locking nuts using the wrench or (-) flathead screwdriver. 7. Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded receptacle. Your washer must be leveled on all four sides. Use a carpenter's level on all four corners of your washer to ensure it's level. It's also a good idea to recheck the leveling after the first dozen washes. Avoid damage to the legs. Do not move the washer unless the lockingnuts are fastened to the bottom of the washer. Test run Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete. 18_ setting up your washer 8 JOEE