Samsung WF42H5200AW/A2 User Manual Ver.0 (English, French, Spanish) - Page 31

04 maintaining your washer Self Clean+ Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine. 1. Press the Power button. WF42H5200A* 2. Press the Self Clean+ button. • Once the Self Clean+ button is pressed, the only function that can be set is Delay End. 3. Press the Start/Pause button. • When you press the Start/Pause button, Self Clean+ begins. WF42H5100A* WF42H5000A* • CAUTION • • Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing agent. Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the laundry or a problem with the washing machine. If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum cleansing agent recommended by the cleansing agent manufacturer. (When using a powder-type cleansing agent , remove the liquid detergent compartment.) The Self Clean+ Auto Indicator Function • If the "Self Clean+" button is lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by running Self Clean. WF42H5200A* • If you do not run Self Clean+ after every 40 washes, the "Self Clean+" indicator turns off after one hour. However, the "Self Clean+" indicator will light again after five washes. Not running Self Clean+ at this point will not cause a problem with the washing machine. • Although the Self Clean+ Auto Indicator appears once a WF42H5100A* WF42H5000A* month or so, the frequency may differ depending on the number of times the washing machine is used. #&55&3@8 JOEE


 English _31