Sanyo CE26LD47-B Instruction Manual - Page 41

Select V Position item by using " " or " " button. Use " " or " " button to adjust the value. Phase Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Select Phase item by using " " or " " buttons. Use " " or " " button to adjust the value. Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Select Dot Clock item by using " " or " " buttons. Use " " or " " button to adjust the value. PC Picture Menu For adjusting PC picture items, do the following: Press " " or " " button to select the second icon. PC Picture menu appears on the screen. Brightness, Contrast, Colour and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under "Analogue TV Menu System". Note: If you set Colour Temp as User, you can define R, G, B settings manually. Sound Menu The items in this menu are described at "Sound Menu" section explained in "Menu System". Feature Menu Feature menu settings are identical to the settings explained in "Feature Menu" section in "Menu System". Source Menu Source menu settings are identical to the settings explained in "Source Menu" section in "Menu System". Displaying TV Information Programme Number, Programme Name, Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or INFO button is pressed. Mute Function Press " " button to disable sound. Mute indicator will be displayed in the upper side of the screen. To cancel mute, there are two alternatives; the first one is pressing the " " button and the second one is increasing the volume level. PIP (Picture-in-Picture) and PAP (Picture-and-Picture) Modes Press the " " button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. There are 1 size and 4 positions (upper left, upper right, bottom left and bottom right) available for the PIP window. You can use " " button to change the PIP position. Aspect Ratio of the PIP window is fixed and 4:3. When PIP Mode is entered, the default active window is the PIP window and the active window is indicated by a red frame around it. The active window can be changed by pressing " " or " " button. The status info OSD belongs to active window. The place of the status OSDs are same for both windows. Press the " " button again to exit the PIP mode. Press the " " button to switch to PAP mode. At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed. When you switch to PAP Mode, main window in PIP Mode will be displayed on the right side of the screen. The active window can be changed by pressing " " or " " button. Press the " " button again to exit the PAP mode. Picture Mode Selection By pressing PP button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema. Note : This function will not be available while in PC mode. English - 40 -