Sanyo DP32746 User Manual - Page 12
Connecting Stb With Dvi Output To Hdmi Input - remote control
View all Sanyo DP32746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DIGITAL AV CONNECTIONS CONNECTING STB WITH DVI OUTPUT TO HDMI INPUT 1 Switch off DTV and external equipment before connecting cable. (Cable is not supplied.) 2 Connect the STB's DVI Output to a "DVI to HDMI Cable;" then connect the cable to the DTV's HDMI input. NOTE: Check with your local electronics store for a DVI to HDMI Cable that matches your equipment and the DTV. What you will need for connections: DVI to HDMI Cable - 1 Audio Cable - 1 3 Connect the STB's Audio L / R to the DTV's VIDEO3 Audio L / R. 4 The DTV must be turned on first, press POWER. Then turn on your external equipment. 5 Press INPUT to select HDMI to view a digital program. SET-TOP BOX (Can be a Digital Satellite Receiver, DVD Player, or similar digital device.) REMOTE CONTROL INPUT POWER 123 5 456 4 2 3 BACK VIEW OF DTV IMPORTANT NOTE FOR MONITOR USE: If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs. I Press the INPUT key after connecting cables to access the AV Inputs. There is NO need to tune to a blank channel. I With a DVI connection, make sure you connect Audio out to the DTV's VIDEO3 Audio in. I Because the VIDEO3 audio jacks are used to receive the audio from the DVI device, these video jacks cannot be used when a DVI device is connected. 12 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032