Sanyo DP32746 User Manual - Page 14
Connecting Digital Audio Out Jack To A Multi-channel, Receiver - no picture
View all Sanyo DP32746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DIGITAL AV CONNECTIONS CONNECTING DIGITAL AUDIO OUT JACK TO A MULTI-CHANNEL RECEIVER Dolby® Digital Audio provides 5.1 channels of surround sound (five full-range channels [5] and one low-frequency effect channel [.1]). A fiber optics cable is used to carry the 5.1 surround sound (for low-noise signal transfer). MULTI-CHANNEL RECEIVER 1 Using a Fiber Optics cable, connect the DTV's Digital Audio Output to the Digital Audio Input of a Multi-Channel Receiver. (Fiber optics cable is not supplied.) 2 Press POWER to turn on the DTV, then turn on external equipment. NOTES:When making the connection, do not pinch or kink the fiber optics cable. Red light visible at the Digital Audio Output does not necessarily indicate that Dolby ® Digital 5.1 audio is available. Digital audio is made up of light pulses that the human eye cannot detect. Dolby ® Digital 5.1 audio is available at the Digital Audio Output only when received as part of a Digital signal. 1 OPTICAL DIGITAL CABLE REMOTE CONTROL BACK VIEW OF DTV IMPORTANT NOTE FOR MONITOR USE: If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs. INPUT POWER 123 2 456 What you will need for connections: Optical Cable - 1 I Position your DTV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality. 14 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032