Sanyo DP50747 Owner's Manual - Page 9
Removing The Stand Optional, Wall Mounting Optional - plasma
View all Sanyo DP50747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
REMOVING THE STAND (OPTIONAL) Tools Needed: Phillips screwdriver Important Note: Place DTV face down on a padded or cushioned surface that is larger than the screen size to protect the screen and finish. Handling by more than two people is recommended. 1 Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw. 2 Carefully remove the stand. WALL MOUNTING (OPTIONAL) Use the threaded inserts on the back of your Plasma DTV to secure it using a wall mounting kit. (UNIVERSAL standard interface 480 x 200 and 480 x 360.) Note: Wall Mounting kit is not supplied. Mounting screws measurements: M6 Diameter, Length-12mm (maximum). 9
9
Tools Needed:
Phillips screwdriver
Important Note: Place DTV face down on a padded
or cushioned surface that is larger than the screen
size to protect the screen and finish. Handling by
more than two people is recommended.
1
Remove four (4) screws from the metal bracket.
CAUTION:
Hold the stand firmly as you remove
the last screw.
2
Carefully remove the stand.
REMOVING THE STAND (OPTIONAL)
Use the threaded inserts on the back of your Plasma
DTV to secure it using a wall mounting kit.
(UNIVERSAL standard interface 480 x 200 and 480 x
360.)
Note: Wall Mounting kit is not supplied.
Mounting screws measurements:
M6 Diameter, Length—12mm (maximum).
WALL MOUNTING (OPTIONAL)