Sanyo EF60 Instruction Manual, PLC-EF60
Sanyo EF60 - PLC SXGA+ LCD Projector Manual
 |
View all Sanyo EF60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo EF60 manual content summary:
- Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 1
Multimedia Projector MODEL PLC-XF60 PLC-EF60 ✽ Projection lens is optional. Owner's Manual - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 2
LCD) technology. ◆ Compatibility The projector the projector's top controls and the remote control provides filter LED tells you the best filter exchange timing. (☞ p63) ◆ Various Security Functions The following security or anti-theft functions prevent others except users from using the projector - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 3
Cover Strap 66 Indicators and Projector Condition 67 Main Indicators 67 Shutter Indicator 68 Warning Filter Indicator 68 Lamp Replace Indicators 69 Appendix 70 Troubleshooting 70 Compatible Computer Specifications 72 Technical Specifications 74 Optional Parts 75 Menu Tree 76 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 4
operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 5
all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 6
Instructions a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 7
Safety Instructions Moving the Projector Carry the projector by two or more people holding the carrying handle. Disconnect all the cables from the projector before moving the projector. Moving the projector with the cables connected may cause damage to the projector or result in serious injury. - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 8
in accordance with the instruction manual, may cause harmful interference Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country ). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 9
u iu o !0 !2 !1 Bottom !3 q Remote Receiver w Projection Lens (Option) e Front Cover (inside Terminals) r Speaker t Carrying Handle y Air Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. CAUTION This projector is equipped with - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 10
TEMP indicator Blinks red when the internal temperature of the projector is abnormally high. (p62,67) e WARNING FILTER indicator Lights orange when the projector's filter is clogged with dust. (p63, 68) r LAMP indicator Lights red when the projector is in the stand-by mode, and turns dim lighting - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 11
pages for respective directions. i SHUTTER button Releases and opens up the built-in shutter to block out light. (p30) o POWER ON-OFF button Turns the projector on or off. (p28, 29) !0 SELECT button Executes the item selected. It is also used to expand/ compress the image in Digital zoom +/- mode - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 12
Preparation Terminals w INPUT 1 INPUT 3 q AUDIO 1 DIGITAL (DVI-D) ANALOG IN ANALOG OUT R-AUDIO-L e (MONO) INPUT 2 S-VIDEO r G AUDIO 2 B R H/V V VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr q INPUT 1 terminals e INPUT 3 terminals AUDIO 1 Connect the audio output from a computer or - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 13
other projector and this terminal with a serial cross cable (commercially supplied). (p23) ✔Note: Refer to the enclosed operation manual for p21, 75) e R/C JACK Connect the remote control to this jack with the supplied remote control cable to use the remote control as wired. (p26) r USB Connect - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 14
JACK Connect the Remote Control Cable to this jack. Battery installation is required regardless if it is used as wired or wireless. (p16, 26) u POWER ON-OFF button Turns the projector on or off. (p28, 29) i FOCUS buttons Adjust focus of the image. (p30) o ZOOM buttons Adjust zoom of the image - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 15
5 INPUT 3 y ID !3 u !4 REMOTE RESET ON ALL OFF q MENU button Opens or closes the On-Screen Menu. (p34, 35) w FREEZE button Freezes the projected picture. (p32) o INFO button Displays the projector information. (p31) !0 AUTO PC button Operates the Auto PC adjustment. (p31) e VOL. button - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 16
is used in a place where the operation of radio equipment is restricted, connect the remote control and the projector with the remote control cable provided. Connected with the remote control cable, the remote control does not emit radio signal. SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 17
Remote Control ID Caution about Radio Wave The remote remote remote remote control may not operate properly due to radio interferences. The remote remote remote control and the projector. Remote remote control to moisture, or heat. ● Do not drop the remote control. ● If a battery has leaked on remote - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 18
optional lens in the projector. Install the lens following the instructions in the Lens Installation Manual provided. Ask the sales dealer for detailed information of optional lens specifications. Do not move the projector with holding the lens mounted and its peripheral part. It may cause serious - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 19
position of the projected image vertically by 50% and horizontally by 10% respectively without any image distortion. ✽ Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04. 50% 10% 10% 50% Installation Level Adjustable Feet This - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 20
of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of the power being supplied. Connect a projector with peripheral equipment before turning on it. (Refer to p22 ~ 25 for connection.) CAUTION For safety - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 21
power cord and other equipment are located in the front part of the projector for easy setup. The terminal area is masked with the board installed in the projector. Pull out the interface board by holding its handles and remove it. Then, insert another board along with the guides inside the slot to - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 22
Cable (HDB 15 pin) w DVI-D Cable e BNC Cable ✽ r Serial Cross Cable (RS-232C) ✽ t Audio Cables (Mini Plug: stereo Not supplied with this projector.) PC Serial Port Audio Output Monitor Output Monitor Output Monitor Input Monitor Output Audio Output r✽ t✽ w q q e t✽ ANALOG IN ANALOG OUT - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 23
Digital PC/AV Equipment (Warp & Blending) Cables used for connection q DVI-D Cable w Serial Cross Cables (RS-232C Not supplied with this projector.) Refer to the enclosed operation manual for details in operation of the Warp & Blending feature. Installation Digital Output PC Serial Port Other - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 24
connection q Video Cable ✽ w S-Video Cable ✽ e DVI-D Cable r Audio Cables (RCA x 2, Mini Plug: stereo Not supplied with this projector.) Audio Output Digital Output (Stereo) (HDCP compatible) r✽ e Video Output Audio Output (R) (L) S-Video Output q✽ r✽ w✽ AUDIO 1 (Stereo) DIGITAL (DVI - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 25
q BNC Cable ✽ w Scart-VGA Cable ✽ e Component Cable ✽ r Audio Cables (Mini Plug (stereo) + RCA x 2, or RCA x 1 Not supplied with this projector.) Installation Audio Output (R) (L) Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output RGB Scart 21-pin Output (R) (L) Component Video Output Audio - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 26
to air signal between the projector and the remote control may prevent the remote control from working properly. Wireless Remote Control Operation Wired Remote Control Operation R/C jack Remote control cable The wireless remote control does not work when the remote control cable is connected to - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 27
Control Operations & Buttons On-Off Lens Shift Zoom Focus Shutter Auto PC Adjust Input Selection Information Keystone Screen Selection Freeze P-Timer D. Zoom Remote CH and ID Volume Mute Menu Select Cancel ➔ Pad ➔ Pad ➔ Pad These buttons are used on the menu operations. ➔ Pad ( ed ) ( ed - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 28
for connection.) 2 Turn on the MAIN On/Off switch of the projector. The LAMP indicator lights red, and the READY indicator lights green. 3 Press the POWER ON-OFF button on the top control or the remote control. The LAMP indicator dims, and the cooling fans start to operate. The preparation display - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 29
1 Press the POWER ON-OFF button on the top control or the remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The LAMP indicator brightly lights red and the READY indicator goes out. After approximate 90 seconds, the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 30
ZOOM FOCUS SHUTTER button ✔Note: • The SHUTTER buttons on the top control and the remote control can not be effective when Shutter Protection is "On" in the Setting menu. (p55) • The SHUTTER indicator on the projector's top lights blue when the shutter is released. (p10) • When the Shutter level - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 31
the top control or the AUTO PC button on the remote control. ✔Note: • Fine sync, Total dots image is not provided properly with this operation, manual adjustments are required. (p42, 43) • Auto this menu to check the projector's operating condition when you face troubles in operation. Refer to the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 32
be memorized. (p49) ✔Note: Horizontal keystone is ineffective for PLC-EF60. • The arrows are white when there is no correction. button Normal Wide True Full screen Custom P-Timer Function Press the P-TIMER button on the remote control. The timer display "00 : 00" appears on the screen and the timer - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 33
. The volume dialog box appears on screen. Adjust volume with the Control pad. indicates approximate level of volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOL button and change volume - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 34
via the On-Screen Menu. Refer to the following pages for respective adjustment and setting procedure. Top Control/Remote Control Operation 1 Press the MENU button on the projector's top control or the remote control to display the On-Screen Menu. 2 Softly tap the Control pad on the top control or - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 35
Basic Operation On-Screen Menu SELECT button Menu icon Guide Currently selected menu. Control bar for Mouse Operation This bar appears when a USB mouse is connected to the USB terminal of the projector. Mouse cursor When clicking on 77 or 88 on the control bar, menu icons rotate fast. When - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 36
with the top control or the remote control, correct input source should be selected through menu operation. Page no. 37~38 selects system of the connected computer and video sources. 39~40 PC ADJ. : adjusts several features precisely for the projector to conform to your computer's signal - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 37
(Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. 37 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 38
& Blending board is initially installed into the Input 4 terminal slot. For details on Warp & Blending feature, refer to the enclosed operation manual. Input 5 A source menu appears corresponding to the board module inserted into the Input 5 terminal. Source Select Menu Move the pointer to RGB - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 39
. (See " Troubleshooting" p70) *SVGA 1 and Mode 1 are examples. PC System Menu The system being selected. System icon Custom Mode (1~50) set in the PC Adjust Menu. (p42, 43) Selecting PC System Manually When the projector has difficulty in recognizing the connected signal conforming to PC - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 40
video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 41
on the remote control unit. (p15, 31) To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once function. When the image is not provided properly with this operation, manual adjustments are required. (p42, 43) • Auto PC Adjustment function - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 42
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 50 independent memory areas to memorize those parameters adjusted manually. It allows you to recall the setting for a specific computer easily. 1 Press the MENU button to display On - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 43
Computer Adjustment Position Adjusts picture position. V-sync phase Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15) ✔Note: V-sync phase is not displayed as the item is initially checked off on My menu in the Setting menu. Change the My - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 44
you want to select and then press the SELECT button. Image Menu (PC) IMAGE icon For PC Input Standard Normal picture level preset on this projector for PC mode. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in IMAGE ADJ. menu (p45~47). Move the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 45
color level, phase and gamma of the selected spot of the projected image and exchange the original color with the adjusted one. The projector can store up to eight color management data. Color selection Press the SELECT button when Color management is highlighted and then Color management pointer - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 46
Image Adjustment Move the pointer to one of the followings with the Control pad and press the SELECT button. LIST displays Color Management List window to store the adjustment data. COLOR.M ..returns to the previous image with the Color management pointer. MENU .........displays a confirmation - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 47
video signal is displayed in a progressive picture. Film This function is effective on 2:3 or 2:2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality. Store To store the adjustment data, move an yellow frame pointer to Store and - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 48
squeezed video signal at 16 : 9. True Provides image in its original size. When the original image size is larger than the screen size, this projector enters panning mode automatically. While "True" is displayed on screen, pan the image with the Control pad. Digital zoom + and - mode can be switched - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 49
is higher than 1600 X 1200, reset the resolution to the lower before connecting the source to the projector. • The image data in other than XGA (1024 x 768 for PLC-XF60) or SXGA (1400 x 1050 for PLC-EF60) is modified to fit the screen size in initial mode. • The panning function may not operate - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 50
Sound Sound adjusts Volume, Treble, Bass, or mutes sound. 1 Press the MENU button to display On-Screen Menu. Spin the menu icons with the Control pad and press the SELECT button when the SOUND icon comes right in front. 2 Move the yellow frame pointer with the Control pad to an item which you - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 51
Setting Setting Setting changes various settings: Language, Menu, Logo, Background, Lamp, Remote control, Display, Input search, Power management, On start, Analog out, Lens memory, Shutter, Security, and Factory default. 1 Press the MENU button to display On-Screen - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 52
the projected image, go to the Logo function and set it to "My logo". Then the captured image can be displayed when turning on the projector next time. (p28) To capture the image, select [Yes]. To cancel the Capture function, select [No]. ✔Note: • Before capturing an image, select Standard in the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 53
relevant instructions of the PJ Lock function on page 57. Background 3 background settings are available in this projector. Lamp Control Lamp Mode When selecting Auto in 1-Lamp mode, the projector automatically selects either lamp of which the total Lamp time is shorter and lights it up. Remote - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 54
or any button on the top control or remote control unit is pressed. Shut down . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector is automatically turned on just by connecting - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 55
having memory functions of itself. Contact to the sales dealer or the service station for available lens. • 100% accurate lens memory is not guranteed remote control and the projector's top control. Remote control . . Selecting "On" prohibits the shutter operation from the remote control. Projector - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 56
in this condition, the projection lamp will be turned on and the remote control. It is useful to prevent the projector from being operated by an unauthorized person. Projector locks operation from the top control. To unlock, use the remote control. Remote control . .locks operation from the remote - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 57
a correct PIN code all over again. PJ lock Enter a PIN code When the projector is locked with the PIN code, the PJ lock mark appears at top left of AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. Change the PJ Lock setting Select a desired - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 58
returns all setting values to the factory default settings except for those including: User logo, PJ PIN code, Logo PIN code, Security setting, Lamp time, Filter time and PJ time. Quit Exits the Setting menu. Factory default Select Factory default and this box appears. Select [Yes], and the next - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 59
. ✔Note: Option box cannot be selected when it is not mounted on the projector. For the information of the Smoke Resist Box, refer to Optional Parts on p75 and contact the sales dealer or the service station. Filter Move the pointer to Reset and then press the SELECT button and the confirmation - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 60
key information and contact the sales dealer or service station for purchasing. Refer to the owner's manual enclosed with the USB key for further page 75 for the optional parts. • USB memory cannot be displayed without the optional USB key connected to the projector. (p13) The item selected - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 61
of the projector. Up to 50 logs can be displayed. Log contents are as follows: Lamp-1 failure Lamp-2 failure Lamp-1 timeover Lamp-2 timeover Power Screen, Language, Lamp mode, Lamp status, Power management, Shutter management, Smoke resist, Option filter time, Security, and Remote control. 1 Press - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 62
cord and contact service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL LAMP 1 REPLACE, WARNING TEMP, WARNING FILTER, READY, SHUTTER , and LAMP 2 REPLACE blinking - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 63
, the WARNING FILTER indicator may light orange even the air filter is clean. ORDER REPLACEMENT FILTER When ordering the replacement air filter, give the following information to the dealer. ● Model No. of your projector : ● Replacement Filter Part No. : PLC-XF60 / PLC-EF60 610 315 1588 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 64
the screws. 5 Connect the AC power cord to the projector and turn on the projector. 6 Reset the Lamp time. See "Lamp time" on p59. Lamp covers Screws (Unremovable) Lamp 1 Handle Lamp 2 CAUTION : DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN MALFUNCTIONS, FIRE HAZARD - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 65
information to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : PLC-XF60 / PLC-EF60 POA-LMP80 (Service Parts No. 610 315 7689) Maintenance & Cleaning LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 66
. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches. Attaching the Cord Cover Strap When mounting the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 67
down enough and the temperature returns to normal, the LAMP indicator lights red and the projector can be turned on. READY, WARNING TEMP, SHUTTER, WARNING FILTER, LAMP 1 REPLACE AND LAMP 2 REPLACE indicators are blinking all together. The projector has been cooled down enough and the temperature - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 68
cooling mode.) In this case, contact the service station immediately. Warning Filter Indicator Indicators READY Green LAMP Red WARNING FILTER Orange Projector Condition Slow The air filter is clogged with dust or has been used overtime. The air filter has been used overtime. 68 The air - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 69
not replaced or fit in. Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on. One lamp is different from the other in wattage. (For example, installed a lamp on 300W and the other on 100W.) If the POWER button is pressed in this condition, the - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 70
projection lamp. (☞ page 64) - Unlock Key lock for the projector in the Setting Menu. (☞ page 56) - Check if the air filter is fully installed and the filter cover monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 71
"Setting" on page 54) Only part of image is displayed. (Large/ INPUT 1 button on the remote control, or through the projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 72
Appendix Compatible Computer Specifications Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 230 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3 VGA 4 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 73
Appendix When a input signal is digital from DVI terminal, refer to chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA1 D-WXGA2 D-WXGA3 RESOLUTION 640 x 480 720 x 480 (Progressive) 768 x 575 (Progressive) 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 H-Freq. (kHz) 31. - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 74
Range Dimensions Net Weight Multi-media Projector 20.39" x 9.92" x 23.86" (518mm x 252mm x 606mm) (Not including adjustable feet) 54.3 lbs (24.7kgs) 0˚ to 3.65˚ PLC-XF60 1.4" TFT Active Matrix type, 3 panels 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PLC-EF60 1400 x 1050 dots 4,410,000 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 75
manual may differ slightly from the product. Optional Parts The parts listed below are optionally available. When ordering those parts, give the item name, Model No. and Option Control No. (if necessary) to the sales dealer. Model No. SCART-VGA Cable Projector USB Key Smoke Resist Box Wired Remote - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 76
Appendix Menu Tree INPUT Input 1 Input 2 Input 3 Input 4 Input 5 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) RGB Video Y, Pb/Cb, Pr/Cr Video Y, Pb/Cb, Pr/Cr S-Video Warp & Blending Board Optional Slot System (1) Auto System (1) System (1) System (1) System (2) System (3) System - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 77
1-Lamp ID 1- 8 Off/On Off/On Off/Ready/Shut down 1 ~ 60 minutes Auto Lamp1 Lamp2 On start Analog out Lens memory Shutter Security Factory default Quit Off/On Off/On Input 1-5 Level Off Memory Normal High contrast Protection Management Remote control Projector 5 ~ 180 minutes Key lock - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 78
management Shutter management Smoke resist Option filter time Security Remote control Quit SPECIAL Lamp Fan control Filter Auto PC adj. Test pattern RS-232C USB memory Warning log Quit Lamp 1 Lamp 2 Normal W Hour(s) Reset W Hour(s) Reset Yes/No Yes/No Max Projector Option box Off/On Cross - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 79
Dimensions Unit : inch (mm) 9.92 (252) 20.39 (518) Appendix 7.24 (184) 5.28 (134) 3.65˚ (Max.) 23.86 (606) Appendix 18.11 (460) 13.58 (345) 15.91 (404) Screw Holes for Ceiling Mount Screws: M8 Depth: 0.31(8.0) 2.36 (60) 18.27 (464) 9.15 (232.5) 9.15 (232.5) 1.08 (27.5) 79 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 80
Appendix Terminal Configurations ANALOG INPUT / OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input / Output 2 Green (G/Y) Input / Output 3 Blue (B/Cb) Input / Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground ( - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 81
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 82
47 Filter 59, 63 Filter Indicator 68 Focus 27, 30 Freeze 32 Front cover 21 Full screen 48 G Gamma 47 H H&V 48 Handling the Projector 7 56 Keystone 27, 32, 49 L Lamp 53, 59 Lamp Control 53 Lamp Mode 53 Lamp Replace Indicator 69 Lamp Replacement 64 Language 51 Lens Installation 18 - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 83
management 54 Progressive 47 Projector Condition 67 Projector ID 60 R Radio Wave 17 READY indicator 10 Real 44 Rear 49 Reference Buttons 27 Remote Control 14, 16, 74 Remote control 53 Remote Control Battery Installation 17 Remote Control Channel and ID 16 REPLACEMENT LAMP 63, 65 RESET - Sanyo EF60 | Instruction Manual, PLC-EF60 - Page 84
Printed in Japan Part No. 610 315 6262 (1AA6P1P4588-- MM7A) SANYO Electric Co., Ltd
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
Owner's Manual
PLC-XF60
PLC-EF60
Multimedia Projector
MODEL
✽
Projection lens is optional.