Sanyo EF60 Instruction Manual, PLC-EF60 - Page 12

Preparation Terminals w INPUT 1 INPUT 3 q AUDIO 1 DIGITAL (DVI-D) ANALOG IN ANALOG OUT R-AUDIO-L e (MONO) INPUT 2 S-VIDEO r G AUDIO 2 B R H/V V VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr q INPUT 1 terminals e INPUT 3 terminals AUDIO 1 Connect the audio output from a computer or video equipment connected to DIGITAL (DVI-D) or ANALOG IN terminal to this jack. (p22, 24) DIGITAL (DVI-D) (HDCP compatible) Connect digital output signal from a computer or video equipment to this terminal with a DVI-D cable. (p22, 24) ANALOG IN Connect analog output signal from a computer or a video equipment (Component or RGB Scart) to this terminal with a VGA cable, a Scart-VGA or a Component-VGA cable. (p22) w ANALOG OUT This terminal can be used for analog signal output incoming through the ANALOG IN terminal (INPUT 1). Connect this terminal to the other monitor with a VGA cable. (p22) AUDIO (R-L) Connect the audio output from video equipment connected to VIDEO/Y Cb/Pb Cr/Pr jacks or S-VIDEO jack to these jacks. (When the audio output is monaural, connect it to L(MONO) jack. (p24, 25) VIDEO/Y, Cb/Pb, and Cr/Pr Connect video or component output (Y, Cb/Pb and Cr/Pr) from video equipment to these jacks with a video cable (RCA-type). (p24, 25) S-VIDEO Connect S-Video output from video equipment to this jack. (p24) r INPUT 2 terminals AUDIO 2 Connect the audio output from video equipment connected to VIDEO/Y, Cb/Pb, and Cr/Pr jacks or G, B, R, H/V, and V jacks to this jack. (p22, 25) VIDEO/Y, Cb/Pb, and Cr/Pr Connect video or component output (Y, Cb/Pb and Cr/Pr) from video equipment to these jacks with a video cable (BNC-type). (p25) G, B, R, H/V, and V Connect RGB output signal from a computer with a computer cable (5 BNC-type) to these jacks. (p22) 12