Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2
Sanyo PDG-DET100L - SXGA+ DLP Projector Manual
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PDG-DET100L manual content summary:
- Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 1
can be controlled and set up remotely. This board is only used for our projectors that have a terminal for the Network Board. This manual explains the installation of the Network Board and its operation. Chapter 1 Preparation Chapter 2 Installation Chapter 3 Basic Setting & Operation Chapter - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 2
accordance with the instruction manual, may cause user may be required to take adequate measures. CAUTION This product provides a lithium battery. When you discard this product, you should return it to your local dealer. CAUTION ON USE IN NETWORK - When you receive an alert e-mail from the projector - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 3
and Network configuration 14 Mounting 14 Connection of LAN cable 25 Login the setting page of the projector 26 1 Enter the IP address 26 network 31 2 Name the projector 31 E-mail Setting 32 1 Projector 35 Power on/off the projector 36 Check the status of projector 37 Control the projector - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 4
49 Cancel the timer 49 Service 50 Save Actual Adjustment 51 Check the Save items 51 Control the projector's menu 53 Make a memo 54 Chapter 5 Controlling the Multi-Projectors 55 Multi-Control 56 Register IP address and projector name 57 Check IP address and projector name 57 Exclude/Add - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 5
Chapter 1 1 Preparation ENGLISH 5 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 6
(Network Board) sends messages to the registered e-mail addresses when a lamp abnormality or power failure occurs with the projector. In this message, it describes how to solve the cause of the problems. You can take efficient action for quick recovery. PC1 PC2 PC3 PC4 Internet Intranet - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 7
INPUT2 for PJ1 to PJ4 Automatic On/Off using Timer function (☞ p.47) Automatically turn on or off the projectors at specified date/day and time by using the clock function. Now it's 11:30 I am ready to turn PC4 Internet Intranet PJ2 PC5 PJ1 DVD Player 7 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 8
card. Web browser application* ● Microsoft Internet Explorer version 5.0 or later ● Netscape Navigator version 4.7 or later * Use to control and set up the projector. The layout of pages in the browser may slightly differ from each type of application or operating system you use. Internet mail - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 9
quality. Normally, cable with category 3 or 5 is used for 10Base-T network and cable with category 5 is used for 100Base-TX network. ENGLISH 9 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 10
instruction procedures may differ from the actual operation depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions , Inc. DLP is a registered - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 11
Chapter 2 2 Installation ENGLISH 11 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 12
are instructions for attaching this product to the projector and connecting it to the network. Please review the entire procedure to become familiar with it. 1 Function of the Network Board (☞ p.13) Check the contents of a package. This product contains a network board, owner's manuals (2 books - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 13
used when controlling the external equipment via the network. (☞ p.61) ! Caution ✐ Do not touch the connector. It may damage the product. 13 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 14
any of the slots 1 to 4*, and then pull the board out from the projector. * The number of the slots may differ from the actual depending on type of the projector. 3 Put the Board into the board slot along the guide. Mount the board connector into the socket in the slot firmly. 4 Secure the board - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 15
cable to the hub. ENGLISH Hub (10Base-T, 100Base-TX) UTP straight cable Projector ✐ Use the UTP cross cable when you connect the computer and projector directly not using the hub. ✐ When you connect the projector into the 10Base-T network, use cable with category 3 or 5. When you connect - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 16
automatically. If not activated, the product may not have been installed correctly. Please check item "Mounting" (☞ p.14). Configure the network When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 17
(Router) DNS*2 Sets IP address of the DNS server. Must be set when using the e-mail function *Refer to the projector's owner's manual for operation of the projector. *1 In the network environments not using a Gateway or Router, the Default Gateway address should be set to [0.0.0.0]. *2 If you do - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 18
Network main menu Chapter 2 Installation Network PIN code setting The Network PIN code can be set to restrict access to the setting page of the projector using the web browser. ✐ Default Network PIN code [0000] means no Network PIN code is set. 1 Displaying Network PIN code menu Select network menu - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 19
For the Projector which provides the Network main menu Network configuration How to enter the numbers with the screen 10-key pallet 1. Select a column with select "Exit" and press SELECT button. The 10-key pallet disap- pears on the screen. 10-key pallet Exit 19 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 20
automatically. If not activated, the product may not have been installed correctly. Please check item "Mounting" (☞ p.14). Configure the network When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 21
mains switch during this period. Completing of installation Now the installation is completed. The IP address of this projector is set to "192.168.1.201". ENGLISH * In the network environments not using a Gateway or Router be set to [0.0.0.0] for the DNS address. 21 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 22
window appears. The numbers on the display indicates the current password. 4 Enter your desired number by using the point buttons on the projector or remote control, and then select SET and press the SELECT button. *The password setting window disappears and the Network Board begins restarting - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 23
and connect to the network. In case of installing the projector with Network Board into the network constructed with the DHCP/BOOTP server. This Network Board does not support the DHCP/BOOTP server. The static IP address must be manually configured. To use this product in this network environment - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 24
Chapter 2 Installation 24 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 25
Chapter 3 Basic Setting and Operation 3 ENGLISH 25 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 26
text area and the login password onto the Password text area and then press the OK button. * The entering User Name must be "user" and it cannot be changed. [Note] When accessing projector for the first time or setting the no password [0000], the auto-login will be performed and the next main - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 27
. Available functions may differ from the actual depending on the projector's model type. The mark of "--" may appear if the projector does not support the function. Please see the owner's manual of the projector to know available functions. * This graphic mode display is mainly used through this - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 28
page in the Text Mode display Returns to the display mode selection page. Main menu For selection of control and setting items of the projector. Displays sub menu and status of selected items when clicking the linked text. Setting page number Browses pages by clicking the linked number. Setting - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 29
Password can be set in this page. The model name of the projector on which this product is mounted is displayed on the page. Projector's model name is indicated. 1 Language Setting This setting is to select setting/Active Script (JavaScript enable)" (☞ p.72). 29 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 30
change password from the default in normal use. When you connect the projector with this product to the network, you should set a password. Only for the replacement of battery. The replacement must be carried out by a qualified service personnel. Prohibit the battery replacement by user because of - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 31
Default gateway, DNS (Domain Name Server) and projector name. 1 Configure the network The IP address projector You can name*3 the projector. By setting this name properly for the DNS server, the projector name. You can access with this projector name from any computers in your network. If you - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 32
an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click on the * If the network board sends an alert message due to the abnormality on the projector but the SMTP server is down in some reason, the message will not be - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 33
"Examples :Type and contents of alert messages" described on the next page. ENGLISH * The mail option item may differ from the actual depending on the projector's function. 33 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 34
ON 350 h Lamp2 ON 500 h Lamp3 ON 60 h Lamp4 ON 350h ✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector is used with- out resetting the lamp counter, the alert mail is sent to users every time the projector is turned on. This alert mail will not be sent when - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 35
Chapter 4 Controlling the Projector 4 ENGLISH 35 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 36
Pressing the On or Standby button on the page, the power of the projector can be controlled. When you press the Standby button, another confirmation popup window browser setting/Active Script (JavaScript enable)" (☞ p.72). ✐ The projector is not turned on for about 90 seconds after switching into the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 37
check the status of the projector as follows. To change the page, click on the page number linked text. Items Description Lamp Mode Displays 2 lamps or 4 lamps mode and lamp status as below icons with Lamp1/Lamp2/Lamp3/Lamp4 order. Yellow Normal Red Lamp replacement required Gray Off Gray - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 38
select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. ✐ If the board name installed in the projector. The setting items differ from the actual depending on the board function. Mounted Board name * Available slots - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 39
is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Click on * ......Makes the image full screen display. * This function is not available for some projector's model types. In such a case, please refer to the section of the screen - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 40
applied to the each PC adjustment item. Select a load mode by clocking the button *1 Available mode may differ from the actual depending on the projector's model type. Type1: Mode1 to Mode5, ExMode6 to ExMode50 Type2: Mode1 to Mode10, ExMode11 to ExMode50 ✐ The Display settings can be stored up to - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 41
function is to select the color system of video signal or scanning system of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, when the source mode is set to the computer mode. 41 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 42
Image1 to Image4 with pull-down button menu . Image1 to 4 are user preset mode. Original Mode ........Displays which predefined image adjustment mode is based the actual depending on the functions of projector you use. The error message may appear if the projector does not support the function. 42 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 43
press the Reset button. Control the Projector The Image1 to Image10 are for the user preset modes to store the image adjustment The Original Mode is represented the mode that user preset mode Image1 to Image10 is created projector's model type. Type1: Image1 to Image4 Type2: Image1 to Image10 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 44
*3....Adjusts the image zooming or compressing. *1 Either of item "Screen" or "Aspect" is available depending on the projector's model type. *2 Item "True" is not available depending on the projector's model type. In that case, use the screen item. *3 These items are only available in the computer - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 45
may differ from the actual *2 The time cannot be setup depending on the prodepending on the functions of projector you use. jector's model type. In this case please see the The Error message may appear if the projector projector's owner's manual. does not support the function. 45 Network Board OWNER - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 46
the Projector (Set JavaScript On) (Set JavaScript Off) * In case of 2 lamps model Item Description Lamp Interval ....Sets the interval period of switching two lamps. Remote Control ......Sets the remote control codes. Lamp Counter Reset Resets the lamp use-time. Reset when replaced lamp - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 47
Projector the factory default value. * There may not be available depending on the projector's model type. Item Description Picture in Picture ......Sets the "P in HDMI source. * There may not be available depending on the projector's model type. ENGLISH ✐ When the Picture in Picture mode is - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 48
to set the Timer This function is used to turn the projector off or on at a programmed day/date and time. "OFF". Select an event ON or OFF with the pull-down menu button to turn on or off the projector. 4 Register an event Press the Set button to register the set timer event. Repeat steps 1 to 4 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 49
event ON occurs during cooling down period, this is invalid event because the projector cannot be turned on during this cooling down period. Cancel the timer To for the replacement of battery. The replacement must be carried out by a qualified service personnel. 49 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 50
Projector Service This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default setting unless a change is needed. There may be not available items depending on the projector projector's model types cannot support - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 51
Actual Adjustment This function is to save and load the control values of the projector. The storable control items are Input, PC, System, Image and Screen controls. 1 from the actual depending on the selected input mode and the function of the projector. ENGLISH 51 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 52
are applied to the current settings. Example of setting ✐ If the contents of the saved set are not match for the slot equipped on the projector, the invalid alert message may be displayed. For example, the message "Invalid setting for SLOT1" will be displayed in the following case. Example: In case - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 53
control the on-screen display menu of the projector. ENGLISH Item Description Display Menu ....To switch same operation with the MENU button on the projector and remote control handset. Cursor Used to same operation with the pointers on the projector and remote control handset. Used to execute - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 54
linked text on the main menu. The following setting page is displayed. It is convenient to use as a memo for the simple description where the projector is placed in. This note will be displayed on the login page. Input a memo and then press the Save button. The saved memo is displayed - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 55
Chapter 5 Controlling the Multi-Projectors 5 ENGLISH 55 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 56
to the network. Click on the Multi Control linked text on the main menu to display the control page. Note: To control the multiple projectors, each projector must has the same password. Example of multi control PJ4 PJ3 PC3 PC4 Internet Intranet PJ2 PJ1 PC5 Select INPUT2 for PJ1 to PJ4 56 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 57
information of the projector is listed as the right. * The word "None" is displayed if the projec- tor name is not registered. Projector name When you . This product allows you to name the projector instead of the IP address. By registering the projector's nickname like "MeetingRoom101", it can be - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 58
chosen for setting when you use this multi-control function. The control for the multi-controlled projectors will become too complicated operation if this function is used for each projector. ✐ If the registered projector is not connected to the network, it will take some time to complete the multi - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 59
projector (☞ p.50) can be used while the multi-controlled projectors projector will be applied to the individual projector assigned to that projectors under the multi-control. ENGLISH ✐ If loading a set to the multiple projectors, the contents of the set must be effective to current accessed projector - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 60
at the same time. * These control items differ from each selected input mode and functions of the projector you use. Change of function is disable if the multi-controlled projector does not support its function. * The above pages are example. They may differ from the actual depending on the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 61
Chapter 6 6 Use of Serial Port ENGLISH 61 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 62
Used to select when the external equipment connected to the serial port is controlled by the computer through the LAN port. Projector........Used to select when the projector is controlled by the serial controller connected to the serial port. Port Indicates the port number of TCP/IP. The default - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 63
numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port. ✐ There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. driver software. Please consult your local dealer. 63 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 64
on the DVD player and start playing. PC3 PC4 Internet Intranet PJ2 PJ1 PC5 DVD Player RS-232C serial cable Example 2 Controlling a projector which is not on the network function through network. PC2 Turn on the projector PJ1 PC4 Internet PJ2 Intranet PC5 PJ1 RS-232C serial cable 64 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 65
Control Examples Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). PC2 PC3 PC4 Internet Intranet PJ2 PJ1 port AB Socket Side A: Reverse (cross) type, factory shipped setting Socket Side B: Normal (Straight) type 65 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 66
Chapter 6 Use of Serial Port Use of Telnet You can control the equipment connected to the serial port on the Network Board and the projector itself by using the telnet application*1 installed on your computer. The following is a control example of external equipment. The telnet application is needed - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 67
projector on. * Enter with ASCII 64-byte capital characters and one-byte characters. To disconnect the communication, type "Ctrl" key and "]" key at the same time. *1 Further instructions about the telnet application, please see the on-line guide connection. 67 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 68
and please consult your local dealer for further information of another commands. Command list table Command Function C00 Turn the projector on C01 Turn the projector off C05 Selects input1 C06 Selects input2 C07 Selects input3 C08 Selects input4 C09 Volume up C0A Volume down C0B - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 69
Chapter 7 Appendix:A Connection examples Web browser setting Technical data 7 ENGLISH 69 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 70
: PC05 IP Address : 192.168.0.5 Subnet Mask : 255.255.255.0 Default Gateway : DNS : Connect the projector (PJ01) to the control computer (PC05) via the hub. Hub Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gateway : 0.0.0.0 DNS : 0.0.0.0 Computer - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 71
Mask Default Gateway DNS : PC205 : 192.168.200.5 : 255.255.255.0 : 192.168.200.1 : 192.168.201.1 Projector Name: PJ01 IP Address : 192.168.200.15 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.200.1 DNS : : 255.255.255.0 : 192.168.10.1 : 192.168.201.1 71 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 72
is set not to use this JavaScript function, it may not control the projector properly. In this case, the following warning message will be displayed on the top of the page. To enable the JavaScript, please see further instructions on the next page. Proxy setting In some cases, your web browser is - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 73
security setting window, scroll down and find the Scripting item, make sure that "Enable" is selected in item Active Scripting. ENGLISH 73 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 74
proxy server address and port correctly in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Use a proxy server. If you connect the projector to the computer directly with UTP cross cable, this must be unchecked - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 75
select the item Advanced/Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked. ENGLISH 75 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 76
to which the projector is connected. - Using proxy server When you use an external internet connection from the local area network, select the item Manual proxy configuration. Enter the proxy server address and port number correctly on the HTTP Proxy item. For further instruction please consult your - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 77
Web Browser heading the preference settings window. Make sure that the Enable scripting is checked in the Active Content column. ENGLISH 77 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 78
settings, press the Settings button to display the Web proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Web Proxy. If you connect the projector to the computer directly with UTP cross cable, this must be unchecked. To - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 79
Netscape Navigator v.4.7 Web Browser Setting JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that Enable JavaScript is checked. ENGLISH 79 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 80
HTTP proxy item in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Select item Direct connection to the Internet in the proxy setting window. If you connect the projector to the computer directly with UTP cross cable, this must - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 81
, Xon/Xoff) Parity check Odd/Even Terminal D sub 9-pin Male Power source Supplied from the projector Power consumption 3.0 watts Dimensions (W x H x D)........5.39" x 1.18" x 4.33" ( 60˚C) * The specifications are subject to change without notice. ENGLISH 81 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 82
Chapter 7 Appendix Port Specification LAN port specification 8-pin modular connector (RJ-45) 12 345678 pin No. 1 2 3 4 5 6 7 8 Signal TX+ TXRD+ (not used) (not used) RD(not used) (not used) Function Transfer data (+) Transfer data (-) Receive data (+) Receive data (-) Serial port specification - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 83
Appendix:B Q&A 83 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 84
in my web browser? Is the problem in the network or in the projector? I would like to find out the problem whether it is in the network or in the projector A Check it by the following steps 1. Disconnect the projector from the network and connect the projector and computer with the UTP cross cable - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 85
. The problems may be in the network configuration of the computer or in the network. Please try to set up the network by following chapter "Network configuration" (☞ p.16, 20). If the login page does not appear, please check for proper mounting of this product onto the projector by referring - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 86
to avoid the IP address collision each other (☞ p.23). To configure the IP address please see chapter "Network configuration" (☞ p.16. p.20) Q How many projectors can I control with multi-control function? A It has been designed to control up to 100 sets but it depends on the network environment - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 87
controls changed if they are in standby mode. But timer and clock settings are always effective, even for projectors in standby mode. Q Why does it sometimes take a lot of time to complete the page dis- play page. A You can register up to 10 addresses. 87 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 88
be required for the authentication depending on the SMTP server. This product does not support this kind of SMTP server. Others Q Can I develop a driver to control of telnet" (☞ p.66). Q Can I control the projector by using the telnet application? A Possible. Please refer to item "Control the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 89
your local dealer. The version number of the firmware is indicated on the lower part of the"Initial Setting" page. Q&A ENGLISH 89 Network Board OWNER'S MANUAL - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 90
Chapter 7 Appendix Q What are the rules for IP address assignment? A If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assignment. Rule1 Do not configure the same IP address to the network - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 91
Q&A 91 Network Board OWNER'S MANUAL ENGLISH - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 92
Network Board Owner's Manual IDRMD (built in KJ5AL) (b) SANYO Electric Co., Ltd.
Network Board
POA-MD13NET2
OWNER’S MANUAL
INSTALLATION and OPERATION of the Network Board
This board is the Network Board to control and set up a projector via a network. Connect
a network cable to this board, and by accessing the connected projector using the web
browser on your computer, the projector can be controlled and set up remotely.
This board is only used for our projectors that have a terminal for the Network Board.
This manual explains the installation of the Network Board and its operation.
Chapter 1
Preparation
Chapter 2
Installation
Chapter 3
Basic Setting & Operation
Chapter 4
Controlling the Projector
Chapter 5
Controlling the Multi-Projectors
Chapter 6
Use of Serial Port
Chapter 7
Appendix