Sanyo PDG-DHT100L Instruction Manual, PDG-DHT100L POA-MD13NET2 - Page 63
the serial port, Setting to control the projector from the serial controller connected
View all Sanyo PDG-DHT100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Serial Port Setting Setting to control the equipment connected to the serial port from the computer Serial Control :Selects "External" Port :Sets according to the com- puter specified port no. Do not use port no. 10000*2. Other Settings :Sets according to the communication condition of the equipment Setting to control the projector from the serial controller connected to the serial port Serial Control :Selects "Projector" Port :Not specified. Do not use port no. 10000*2. Other Settings :Sets according to the communication condition of the serial controller Setting to control the projector from the computer through the LAN port Serial Control :Not specified Port :Not specified Other Settings :Not specified * The port no. of the computer must be used with 10000. ENGLISH *1 This product will restart automatically when "Port" or "Serial Control" is changed and it takes about 40 seconds. *2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port. ✐ There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. This product provides with a serial port switching socket. Set this switch to proper side according to the cable type. How to switch the serial port socket, see item "Serial Port Switching".(☞ p.61) ✐ Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer. 63 Network Board OWNER'S MANUAL