Home » Sanyo Manuals » Projectors » Sanyo PDG-DHT100L » Manual Viewer

Sanyo PDG-DHT100L Instruction Manual, PDG-DHT100L POA-MD13NET2 - Page 68

Control the projector with Telnet, After the communication is established

Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Chapter 6 Use of Serial Port Control the projector with Telnet This product allows you to control the projector by using the Telnet application. Normally, it is used for controlling the external equipment connected to the serial port and also control the projector itself by specifying the telnet port no.10000. * It is not affected by the serial port setting of the projector when using the telnet application. In the step 2 of the previous page, enter port no. "10000" after the IP address no. > open 192.168.1.201 10000 return * Use the IP address assigned to the projector After the communication is established, type the password and the command for controlling the projector and then enter "Enter" key. The right table shows the typical command lists for controlling the our projector and please consult your local dealer for further information of another commands. Command list table Command Function C00 Turn the projector on C01 Turn the projector off C05 Selects input1 C06 Selects input2 C07 Selects input3 C08 Selects input4 C09 Volume up C0A Volume down C0B Mute on C0C Mute off C0D Video mute on C0E Video mute off C1C Menu display on C1D menu display off 68

Section	Page
Compliance	2
Contents	3
Chapter 1 Preparation	5
Features	6
Operating Environment	8
Notices	10
Chapter 2 Installation	11
Flow of installation	12
1 Name and function of each part	13
2 Installation and Network configuration	14
Mounting	14
Connection of LAN cable	15
Network configuration (Type1)	16
Network PIN code setting	18
Network configuration (Type2)	20
Password setting [Display]	22
Notice about system construction	23
Chapter 3 Basic Setting and Operation	25
Login the setting page of the projector	26
1 Enter the IP address	26
2 Select a display mode and login	26
3 Display of main setting page	27
Initial Settings	29
1 Language Setting	29
2 Password Setting	30
3 Date/Time Setting	30
Network Configuration	31
1 Configure the network	31
2 Name the projector	31
E-mail Setting	32
1 Registering SMTP Server, Administrator Address	32
2 Registering and deleting E-mail address	33
3 Condition selection for sending alert message	33
Examples: Type and contents of alert mail	34
Chapter 4 Controlling the Projector	35
Power on/off the projector	36
Check the status of projector	37
Control the projector	38
Input	38
PC Adjustment	39
Save a Set	40
Load a Set	40
System Adjustment	41
Image Adjustment	42
Save a image adjustment value	43
Load a image mode	43
Screen Adjustment	44
Sound Adjustment	44
Setting	45
How to set the Timer	48
Check the Timer events	48
Getting the current time	49
Cancel the timer	49
Service	50
Save Actual Adjustment	51
Check the Save items	51
Control the projector's menu	53
Make a memo	54
Chapter 5 Controlling the Multi-Projectors	55
Multi-Control	56
Register IP address and projector name	57
Check IP address and projector name	57
Exclude/Add/Delete a projector	58
Status	58
Control	59
Load and apply the setting value	59
Control multi-projectors at the same time	60
Chapter 6 Use of Serial Port	61
Serial Port setting	62
Control Examples	64
Use of Telnet	66
Control the projector with Telnet	68
Chapter 7 Appendix:A	69
Examples of Connection	70
Peer-To-Peer connection	70
The gateway (Router) installed in the network	71
Web browser setting	72
Active Script/JavaScript enable	72
Proxy setting	72
Examples: OS/Browsers	73
Windows XP Professional	73
Mac OS 8.6	77
Product specification	81
Port Specification	82
Appendix:B	83