Sanyo PDG-DSU30 RS232 Expand - Page 24

PDG-DSU30 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1" [CR] "ENG Select ENGLISH "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish "POR Select Portuguese "POL Select Pohland "SVE Select Swedish %1 "NOR Select Norway "GRE Select Greece "CHI Select Chinese "JPN Select Japanese "KOR Select Korea "RUS Select Russia "HUN Select Hungarian "CZE Select Czech "TUR Select Turkish Details Select language for OSD. (Valid only when in the normal Power ON status.) The language set by this command is stored in EEPROM and the setting remains after the power is ALL OFF. No display is shown when projector received this command.. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.2 CF_MENUPOISITION Command Command "CF_MENUPOSITION_%1" [CR] "TOPLEFT Move the menu display to top-left "TOPRIGHT Move the menu display to top-right %1 "CENTER Move the menu display to center "BTMLEFT Move the menu display to bottom-left "BTMRIGHT Move the menu display to bottom-right Details Change the menu position This command is available in normal Power ON status. The status set with this command is stored in EEPROM and its setting is effective after ALL is OFF. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 8.10.3 CF_INPUTSEARCH Command Command "CF_INPUTSEARCH_%1"[CR] %1 "OFF Set Input search operation OFF "ON Set Input search operation ON Details Set Input search operation mode. (Valid only in the normal Power ON status.) The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. No display is shown when projector received this command. Acceptable "000" [CR] Correspondence Unacceptable "Error Code" [CR] 24 / 42