Sanyo PLC-WL2503 RS232C Expand

Sanyo PLC-WL2503 - 2500 Lumens Manual

Get Sanyo PLC-WL2503 - 2500 Lumens PDF manuals and user guides
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WL2503 manual content summary:

  • Sanyo PLC-WL2503 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-WL2500 PLC-WL2501 PLC-WL2503 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-WL2503 | RS232C Expand - Page 2
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications - CONTENTS 1. Overview ...7 2. Serial Interface Specification 7 Input Status Read Command Table 12 6.5 Screen Status Read Command Table 13 6.6 Lamp Status Read Command Table 13 6.7 Sound Status Read Command Table 13 6.8
  • Sanyo PLC-WL2503 | RS232C Expand - Page 3
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command 19 8.4.9 CF_PROGV 8.7.6 CF_VPOS Command 30 8.7.7 CF_HSCALE Command 30 8.7.8 CF_HPOS Command 31 8.8 Lamp Command ...32 8.8.1 CF_LAMPH Command 32 8.8.2 CF_LAMPMODE Command 32 8.9 Sound Command
  • Sanyo PLC-WL2503 | RS232C Expand - Page 4
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.9.2 CF_MUTE Command 33 8.10 Setting Command 34 8.10.1 CF_LANG Command 34 8.10.2 CF_MENUPOSITION Command 34 8.10.3 CF_AUTOSETUPPCADJ Command 35 8.10.4
  • Sanyo PLC-WL2503 | RS232C Expand - Page 5
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9. Status Read Command 46 9.1 Format ...46 9.2 Transfer Example 46 9.3 Operation Condition 46 9.4 Image Status Read Command 47 9.4.1 CR_BRIGHT Command 47 9.4.2
  • Sanyo PLC-WL2503 | RS232C Expand - Page 6
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command 56 9.7.10 CR_MODELIST Command CR_VPOS Command 57 9.8.5 CR_HSCALE Command 57 9.8.6 CR_HPOS Command 58 9.9 Lamp Status Read Command 59 9.9.1 CR_LAMPREPL Command 59 9.9.2 CR_LAMPH Command 59
  • Sanyo PLC-WL2503 | RS232C Expand - Page 7
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.20 CR_CCAPTIONDISP Command 66 9.11.21 CR_CCAPTIONCOLOR Command 66 9.11.22 CR_RCODE Command 66 9.11.23 CR_SECURITY Command 66 9.
  • Sanyo PLC-WL2503 | RS232C Expand - Page 8
    PLC-WL2500 / WL2501 / WL2503. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC COM 1 Projector Control Port (D-
  • Sanyo PLC-WL2503 | RS232C Expand - Page 9
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 3. Notes for communication executed. When it takes more than one second to receive carriage return (0X0D) after the projector receives the first data "C", it clears the information of buffer. 4. On command pipelining,
  • Sanyo PLC-WL2503 | RS232C Expand - Page 10
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_SHARP_%1[CR] CF_GAMMA_%1[
  • Sanyo PLC-WL2503 | RS232C Expand - Page 11
    PLC-WL2500 / WL2501/ WL2503 Expand Serial 5.5 Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset Lamp use time Select Lamp mode color of Closed caption Select Remote Control Reception Code Disable RC/Projector keys (Only available to models with top panel button) Input
  • Sanyo PLC-WL2503 | RS232C Expand - Page 12
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 5.8 Other Command Table Execute command CF_KEYEMU_%1[CR] CF_MENU_%1[CR] CF_POWER_%1[CR] CF_FREEZE _%1[CR] CF_VMUTE _%1[CR] Item Behave the same as corresponding key of the projector / remote control. Switch ON/OFF of each
  • Sanyo PLC-WL2503 | RS232C Expand - Page 13
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR]
  • Sanyo PLC-WL2503 | RS232C Expand - Page 14
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table for Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp number
  • Sanyo PLC-WL2503 | RS232C Expand - Page 15
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications CR_FILH[CR] CR_FILREPL[CR] CR_VMUTE[CR] CR_FREEZE[CR] CR_TEMPWARN[CR] CR_TEMP[CR] CR_TEMPFAIL[CR] Item Get setting status of Projector behavior Get Signal Status if there is a signal or not Get setting status of No Show
  • Sanyo PLC-WL2503 | RS232C Expand - Page 16
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? Details -When the received data cannot be decoded -Parameter determination error (digit number error, including
  • Sanyo PLC-WL2503 | RS232C Expand - Page 17
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) 2. The projector decodes the received command and when it is ready to receive the next command, it returns
  • Sanyo PLC-WL2503 | RS232C Expand - Page 18
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Color setting value - 1 Details Set Color value of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is
  • Sanyo PLC-WL2503 | RS232C Expand - Page 19
    WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1"[CR] "000~015 Directly select Sharpness setting value %1 "UP Current Sharpness setting value + 1 "DN Current Sharpness setting value - 1 Details Set Sharpness value of user
  • Sanyo PLC-WL2503 | RS232C Expand - Page 20
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1"[CR] "000" Power ON status) The value set by this command will not be saved to the projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to
  • Sanyo PLC-WL2503 | RS232C Expand - Page 21
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command " user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user
  • Sanyo PLC-WL2503 | RS232C Expand - Page 22
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command Set Fine Sync value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting.
  • Sanyo PLC-WL2503 | RS232C Expand - Page 23
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H- Display Dots value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original
  • Sanyo PLC-WL2503 | RS232C Expand - Page 24
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_ Line value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original
  • Sanyo PLC-WL2503 | RS232C Expand - Page 25
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT same operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while
  • Sanyo PLC-WL2503 | RS232C Expand - Page 26
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.2 CF_SOURCE Command Command "CF_SOURCE_%1"[ selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available
  • Sanyo PLC-WL2503 | RS232C Expand - Page 27
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.5 CF_INPUT3 Command Command "CF_INPUT3_% and also Source specified in %2 This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu
  • Sanyo PLC-WL2503 | RS232C Expand - Page 28
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.9 CF_SYSTEM Command Command " of currently selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed This command is available in
  • Sanyo PLC-WL2503 | RS232C Expand - Page 29
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7 Screen Control Command Details Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN"
  • Sanyo PLC-WL2503 | RS232C Expand - Page 30
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE_%1"[CR into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Response Unacceptable "Error Code
  • Sanyo PLC-WL2503 | RS232C Expand - Page 31
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command "CF_VPOS_%1"[CR] "015 15 into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable
  • Sanyo PLC-WL2503 | RS232C Expand - Page 32
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 " this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error Code"[
  • Sanyo PLC-WL2503 | RS232C Expand - Page 33
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset Lamp use time counter. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error
  • Sanyo PLC-WL2503 | RS232C Expand - Page 34
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command is canceled just like RC operation. The value set by this command is stored in Projector. This command is available in normal Power ON status. Acceptable "000"[CR] Response
  • Sanyo PLC-WL2503 | RS232C Expand - Page 35
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1"[CR] "ENG Select English "DEU Select German "FRA Select French "ITA Select
  • Sanyo PLC-WL2503 | RS232C Expand - Page 36
    PLC-WL2500 / WL2501/ WL2503 Expand is unable to set both PC ADJ. and Input search to OFF. If projector receives Auto PC ADJ. OFF command while Input search is OFF, it remains even after the power is turned to ALL OFF status. *When 1="USER" is received, error code "101" is returned, in the case of Capture
  • Sanyo PLC-WL2503 | RS232C Expand - Page 37
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.7 CF_DISP Command Command " setting, but it does not release LOGO LOCK. (LOGO LOCK continues.) Projector returns Error Code "101" by receiving USER in %2 when capture has not operated. Acceptable "000"[CR] Response
  • Sanyo PLC-WL2503 | RS232C Expand - Page 38
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.9 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling
  • Sanyo PLC-WL2503 | RS232C Expand - Page 39
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.13 CF_HDMI SOUND Command Command " "000"[CR] Response "Error Code"[CR] Unacceptable When Input is Computer 2, the projector returns "101" and the command is not executed. 8.10.15 CF_STANDBYMODE Command Command
  • Sanyo PLC-WL2503 | RS232C Expand - Page 40
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.17 CF_P-MANETIME Command Command "CF_P-MANETIME_%1"[CR] "01" ~ "30 Directly select setting time by the minute "UP Plus
  • Sanyo PLC-WL2503 | RS232C Expand - Page 41
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.21CF_PTIME Command Command "CF_PTIME_%1"[CR] %1 "001" ~ "180 Directly specify the time by minutes. Details Set Countdown timer for P-timer
  • Sanyo PLC-WL2503 | RS232C Expand - Page 42
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional CF_KEYDIS_%1"[CR] "NONE RC & Projector keys are valid (All are valid) %1 "RC RC keys are invalid "KEY Projector keys are invalid Details (This every time lamp turns on. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 41/72
  • Sanyo PLC-WL2503 | RS232C Expand - Page 43
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.27 CF_FANMODE Command Command "CF_FANMODE_%1"[CR] %1 "L1 Set Fan Mode to L1 "L2 Set Fan Mode to L2 Details
  • Sanyo PLC-WL2503 | RS232C Expand - Page 44
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.31 CF_FILH Command Command "CF_FILH_%1"[CR] %1 "RST Reset Filter used time Details Reset filter used time Acceptable "000"[CR]
  • Sanyo PLC-WL2503 | RS232C Expand - Page 45
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 Select key. "AUTOPC Execute Auto PC adj. Details This command behave the same as corresponding RC/Projector keys Once Auto PC adj. is started with "AUTOPC" command, it does not stop with
  • Sanyo PLC-WL2503 | RS232C Expand - Page 46
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Note) "UP" and "DN" behave the same. Details Set/Cancel Freeze setting. Although projector returns "000", receiving another Freeze command does not release Freeze operation. This command is available in
  • Sanyo PLC-WL2503 | RS232C Expand - Page 47
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command: Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000
  • Sanyo PLC-WL2503 | RS232C Expand - Page 48
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user control Acceptable Response %a "000_ "[CR] "000"~"063" Unacceptable "Error code"[CR] 9.4.2 CR_CONT
  • Sanyo PLC-WL2503 | RS232C Expand - Page 49
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4.7 CR_WBAL - R Command Command "CR_WBAL-R"[CR] Details Get White Balance Red value of user control Response Acceptable %a "000_%a"[CR] "000"~"063" Unacceptable "Error code"[CR] 9.4.8 CR_WBAL - G Command Command
  • Sanyo PLC-WL2503 | RS232C Expand - Page 50
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4.12 CR_PROGV Command Command "CR_PROGV"[CR] Details Get setting status of Progressive scan Acceptable "000_%a"[CR] "L1 Progressive Mode L1
  • Sanyo PLC-WL2503 | RS232C Expand - Page 51
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Response Acceptable %a "000_%a"[CR] "0000"~"
  • Sanyo PLC-WL2503 | RS232C Expand - Page 52
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.5.6 CR_DDOTS Command Command "CR_DDOTS"[CR] Details Get Display Dots value Acceptable "000_%a"[CR] Response %a "0256"~"nnnn" (nnnn = Total Dots - Horizontal
  • Sanyo PLC-WL2503 | RS232C Expand - Page 53
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in Auto
  • Sanyo PLC-WL2503 | RS232C Expand - Page 54
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%1"[CR] Response Request data "1"-"5"
  • Sanyo PLC-WL2503 | RS232C Expand - Page 55
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4" [CR] Details Get selected source of Input 4_Video Acceptable "000_%1"[CR] Response Request data "VIDEO Composite
  • Sanyo PLC-WL2503 | RS232C Expand - Page 56
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.8 CR_SYSTEM Command Command " is selected "480p 480p is selected "575i 575i is selected "480i 480i is selected Projector returns selected System status regardless of the signal input. Input is Video,S-Vi deo "AUTO
  • Sanyo PLC-WL2503 | RS232C Expand - Page 57
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command "CR_SYSLIST"[CR] Details Get selectable System titles Acceptable "000_%1_%2_..._%x" [CR] - When Input is PC-Analog "XGA1 XGA1is selectable "1080I 1080i is selectable Projector does not
  • Sanyo PLC-WL2503 | RS232C Expand - Page 58
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.8 Screen Status Read mode is selected "CUSTOM Custom mode is selected When the screen is set to D.Zoom, projector returns the previous Response %a status (NORMAL ) "NORMAL Normal mode is selected Input is Video
  • Sanyo PLC-WL2503 | RS232C Expand - Page 59
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.8.6 CR_HPOS Command Command "CR_HPOS"[CR] Details Get setting status of Horizontal Position Store Mode Response Acceptable %1 "000_%1"[CR] "-15" ~ "015" Unacceptable "Error code"[CR] 58/72
  • Sanyo PLC-WL2503 | RS232C Expand - Page 60
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time
  • Sanyo PLC-WL2503 | RS232C Expand - Page 61
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] " **** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector.
  • Sanyo PLC-WL2503 | RS232C Expand - Page 62
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Response Acceptable %a "000_%a"[CR] "000"~"063" Unacceptable "Error code"[CR] 9.10.2 CR_MUTE
  • Sanyo PLC-WL2503 | RS232C Expand - Page 63
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command "CR_LANG"[CR] Details Get selected language Acceptable "000_%a"[CR] "ENG Select
  • Sanyo PLC-WL2503 | RS232C Expand - Page 64
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.4 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is
  • Sanyo PLC-WL2503 | RS232C Expand - Page 65
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.9 CR_SCREENASPECT Command Command "CR_SCREENASPECT"[CR] Details Get status of Screen aspect Acceptable "000_%1"[CR] "43MODE" Response %1 "169MODE" "1610MODE" Unacceptable "
  • Sanyo PLC-WL2503 | RS232C Expand - Page 66
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.14 CR_P-MANE Command Command "CR_P-MANE"[CR] Details Get Power management setting status Acceptable "000_%a"[CR] "OFF Power
  • Sanyo PLC-WL2503 | RS232C Expand - Page 67
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.19 CR_PTIME Command Command "CR_PTIME"[CR] Details Get setting status of Countdown timer. Response Acceptable %a "000_%a"[CR] "001"~"180 1~
  • Sanyo PLC-WL2503 | RS232C Expand - Page 68
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.24 CR_KEYDIS Command Command "CR_KEYDIS"(CR) Details This command is available to models with top panel buttons only. Get disability status of RC/Projector keys (valid or invalid) Acceptable "000_%a"[CR] "NONE RC
  • Sanyo PLC-WL2503 | RS232C Expand - Page 69
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.29 CR_DELAYCTRL Command Command "CR_DELAYCTRL"[CR] Details Get setting status of Video delay control Acceptable "000_%1"[CR] Response %1 "ON
  • Sanyo PLC-WL2503 | RS232C Expand - Page 70
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector Cooling down due to Lamp failure "81"= Stand by after Cooling down due to Lamp failure Unacceptable "Error
  • Sanyo PLC-WL2503 | RS232C Expand - Page 71
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature If there are several sensors installed,
  • Sanyo PLC-WL2503 | RS232C Expand - Page 72
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector as "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering ON.
  • Sanyo PLC-WL2503 | RS232C Expand - Page 73
    PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector when abnormal temperature occurs. If there are several sensors installed, it is possible to get information from all
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-WL2500
PLC-WL2501
PLC-WL2503
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division