Sanyo PLC-WXU30A Owner's Manual - Page 28

Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER/VIDEO/NETWORK button Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source. See pages 3031, 40-41 for details. Refer to the owner's manual "Network Set-up and Operation" for details about the network input. FREEZE button Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Remote Control COMPUTER button AUTO PC button VIDEO button NETWORK button POINT ed buttons FREEZE button AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 33 for details. D.ZOOM buttons LAMP CONTROL button NO SHOW button P-TIMER button IMAGE button D.ZOOM buttons Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/- mode. See page 39 for details. LAMP CONTROL button Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness on the screen. Auto The brightness according to the input signal (between High and Eco mode). High Brighter than the Normal mode. Normal....... Normal brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. ✔Note: • See the next page for the description of other buttons. 28