Sanyo PLC-XU300 Instruction Manual, PLC-XU300 Network Set Up - Page 39

Setting up the projector Setting 1 Item Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes the Auto PC Adj, and Input Search function below according to the each setting after clicking Start button. Auto PC Adj.......Sets Auto PC Adjustment mode. (ON, OFF) Input search......Sets the auto-input signal detection mode. (ON1, ON2, OFF) Auto keystone.....Sets Auto Keystone mode. (Auto, Manual, OFF) Background.........Sets the screen background when no signal input. (Blue, User, Black) Display Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off, ON) Countdown off........Displays image during the starting up. Logo Sets on or off the logo display on the screen during the startup. (User, Default, OFF) Setting 2 Item Description Ceiling Sets the image top/bottom and left/ right reversed. (ON, OFF) Rear Sets the image left/right reversed. (ON, OFF) Terminal Sets the COMPUTER IN 2/MONITOR OUT terminal to COMPUTER 2 or Monitor Out. Power management......Sets into the selected power management mode (OFF, Ready, Shutdown) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. On start Sets the power-on mode when the AC cord is connected to the outlet. Lamp control......Selects lamp control mode. (Normal, Eco) Lamp life control Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds the recommended total hours of use. ENGLISH 39