Sanyo PLC-XU300 Instruction Manual, PLC-XU300 PJ Net Manager Windows - Page 11

Addition of the target 1 Select Target Addition from Target menu. The target information registering window appears. Items Description Name Enter a management name of the target equipment. IP address Enter IP address of the target equipment. Community Enter a community name in the network. Default name is "public". System information..... Displays information set on the network equipment Addition of the target 2 Enter target setup information and click Update button. The information set on the target equipment are dis- played on the system information items. 0 When the target equipment is not operating, or it is not the monitoring equipment, the error dialog "Cannot obtain information" will appear. 3 Click OK to close the window. Repeat the above steps to register for other equipment which is to be managed. Editing the target 1 Select a target name to edit on the status list with right click. 2 Select Target editing on the popup menu. The target information window will appear and edit the contents, then click OK button. 0 The system information cannot be edited. 0 Target editing can be executed by selecting Target editing from Target menu. Deletion of the target 1 Select a target name to delete on the status list with right click. 2 Select Target deletion on the popup menu. The confirmation dialog will appear and click Yes button to execute deleting. 0 Target deletion can be executed by selecting Target deletion from Target menu. 0 It cannot perform the target addition, editing and deletion during the target monitoring. 0 Up to 200 targets can be registered. 0 Up to 255 characters can be used for target name and community. PJ NETWORK MANAGER 11 OWNER'S MANUAL