Sanyo PLC-XU300 Instruction Manual, PLC-XU300 PJ Net Manager Windows - Page 25

Description of Event, Type, Warning column, Warning value Description of warning value Warning Column Warning Value Connect Un-connected Connected * Acquisition error Power status Power failure TemperatureError Normal (AfterTempError) RS232CFailure Power management LampFailure Normal(Standby) * Normal(OnCoolingDown) * Input signal status SignalsInterrupted SignalsInputted * Inside Temperature status (A to C] Abnormal External Temperature status Lamp status ON * Failure Replace Lamp time Filter time (Auto play error) (lamp time) (filter time) Error Description Projector has been disconnected from the network Projector has been connected to the network PJ Network Manager could not acquire the MIB information from the equipment Projector turned off due to the power failure of the projector The projector turned off due to temperature error occurred Normal after temperature error occurred The RS-232C communication error occurred The power management function turned projector lamp off The lamp failure occurred Projector turned into standby normally On cooling down normally due to projector turned off The signal was interrupted The signal was inputted again The projector turned off when the temperature was abnormally high When the lamp is on When the lamp failed to ignite. It reached lamp replacing time. It reached user setting lamp replacing time It reached user setting filter time The error occurred during the auto image display 0 T he warning value with "*" in the above table shows the event when the alert has cleared, alert type is "OFF". 0 T he column order and width of the event log window are saved to the registry of the computer. 0 U p to 1000 of events can be stored. If it exceeds 1000 events, the oldest event is deleted and the latest event is added. The event log can be saved to the management file. 0 This Warning column is not available for some projector's model types. PJ NETWORK MANAGER 25 OWNER'S MANUAL