Sanyo PLC-XU40 Owners Manual - Page 20

BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press the ZOOM button on the Top Control or the ZOOM L/M button on the Remote Control. The message "Zoom" is displayed. 2 Press the ZOOM L button or the POINT UP button to make image larger, and press the ZOOM M button or the POINT DOWN button to make image smaller. Zoom The message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press the FOCUS button on the Top Control or the FOCUS L/M button on the Remote Control. The message "Focus" is displayed. 2 Adjust focus of image by pressing the FOCUS L/M button or the POINT UP/DOWN button(s) . Focus The message disappears after 4 seconds. KEYSTONE ADJUSTMENT If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment. 1 Press the KEYSTONE button on the Remote Control or select Keystone in the SETTING Menu. (Refer to page 36.) The keystone dialog box appears. 2 Correct keystone distortion by pressing the POINT UP/DOWN button(s) on the Top Control or on the Remote Control. Press the POINT UP button to reduce the upper part of the image, and press the POINT DOWN button to reduce the lower part. Reduce the upper width with the POINT UP button. Reduce the lower width with the POINT DOWN button. • The arrows are white when there is no correction. • The arrow disappears at the maximum correction. • The direction of the arrow being corrected turns red. • If you press the KEYSTONE button on the Remote Control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled. PICTURE FREEZE FUNCTION Press the FREEZE button on the Remote Control to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. 20