Sanyo PLC-XU40 Owners Manual - Page 31

VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). RGB Scart Input To select RGB Scart 21-Pin video input through the COMPUTER IN 2 / MONITOR OUT terminal, see "COMPUTER INPUT (RGB Scart 21Pin Video Input)" on page 22. INPUT button Video Computer 1 Computer 2 ✽ VIDEO button Video ✽ When the Monitor out is selected at the Terminal item in the SETTING Menu, Computer 2 is not displayed. MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the INPUT Menu icon. 2 Press the POINT DOWN button to move the red arrow pointer to Video and then press the SELECT button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SELECT button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO 3rd VIDEO The Y-Pb/Cb-Pr/Cr has priority over the S-VIDEO. The S-VIDEO has priority over the VIDEO. Video When video input signal is connected to the VIDEO jack, select Video. S-Video When video input signal is connected to the S-VIDEO jack, select S-Video. Y,Pb/Cb,Pr/Cr When video input signal is connected to the Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr. INPUT MENU VIDEO Move the pointer to Video and press the SELECT button. Source Select Menu (VIDEO) Move the pointer to the source and press the SELECT button. ✽ When the Monitor out is selected at the Terminal item in the SETTING Menu, Computer 2 is not displayed. 31