Sanyo PLV-80L Instruction Manual, PLV-80L - Page 9

PREPARATION POSITIONING PROJECTOR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 5.0' (1.5m) ~ 52.2' (15.9m). ● Refer to figure below to adjust screen size. ROOM LIGHT Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image. 12.7'(3.9m) 5.0'(1.5m) 100" 40" 77" 25.6'(7.8m) 200" 154" 52.2'(15.9m) 38.4'(11.7m) Max. Zoom 400" 300" 231" Min. Zoom 308" 30" NOTE: The figures below are only for Model PLV-75/PLV-80. Projection lens is not provided with Model PLV-75L/PLV-80L. Screen Max. Zoom 40" Size Min. Zoom 30" 100" 77" 150" 115" 200" 154" 250" 192" 300" 231" 400" 308" Distance 5.0' (1.5m) 12.7' (3.9m) 19.1' (5.8m) 25.6' (7.8m) 32.0' (9.8m) 38.4' (11.7m) 52.2' (15.9m) LENS SHIFT ADJUSTMENT Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image where you want. Refer to P 22 for operation. Highest Lens Shift Lowest Lens Shift H3 H1 H2 H4 H1 : H2 = 6 : 1 H3 : H4 = 1 : 1 NOTE Screen size and lens shift ratio on the above charts are standard values and they may change by positioning conditions. LENS INSTALLATION (For Lensless model PLV-75L/PLV-80L only) Before setting up a projector, install Projection Lens on Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of a Projection Lens, contact sales dealer where you purchased a projector. 2. For installation, refer to installation manual in the optional lens. COVER CAP NOTE; When install the lens, remove the cover cap in the projector. 9