Sanyo PLV-Z60 Owners Manual - Page 41

Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Menu Operation Press the Point ed buttons to select the Information Menu. The Information Menu is displayed. See below for displayed information. Remote Control COMPONENT HDMI VIDEO C1/C2 H1/H2 INFO. S-VIDEO PC INPUT CXVT INFO. button Signal Video or S-video Component HDMI PC No signal Out of recognition A color system of the connected video signal is displayed from among PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N. A system mode of the connected video signal is displayed from among 480i, 480p, 575i, 575p, 720p, and 1080i. A system mode of the connected video signal is displayed from among D-VGA, D480i, D-480p, D-575i, D-575p, D-720p, D1080i, and D-1080p. A resolution of the connected computer signal is displayed. When there is no signal input, "- - - -" is displayed. When the connected input source is out of recognition, "Unknown" is displayed. H-sync freq. The horizontal frequency of the input signal is displayed in KHz, or "- - - -" when no signal. V-sync freq. The vertical frequency of the input signal is displayed in Hz, or "- - - -" when no signal. Lamp Time The cumulative lamp operating time is displayed. Image The selected image mode is displayed. Screen The selected screen size is displayed. Input The selected input source is displayed. Lamp status The selected lamp mode is displayed. Information Menu 41