Sanyo VPC E1 Instruction Manual, VPC-E10EX
Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Manual
 |
UPC - 086483067532
View all Sanyo VPC E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VPC E1 manual content summary:
- Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 1
INSTRUCTION MANUAL Digital Camera VPC-E10EX VPC-E10 VPC-E10GX Important note This manual explains how to safely operate the VPC-E10EX, VPC-E10 and VPC-E10GX. Any information regarding only one of these products will be labeled as such. Please read these instructions carefully before using the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 2
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules installed and used in accordance with the instructions, may cause harmful interference to radio Conformity Model number: VPC-E10 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 3
used electrical and electronic products. Please help us to conserve the environment we live in! SANYO FISHER Sales (Europe) GmbH Stahlgruberring 4, D-81829 München, Germany SANYO Electric Co., Ltd. 1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan FOR RUSSIAN USERS This product certified by official - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 4
in this manual HINT Points giving some extended instructions or special points to pay attention to. CAUTION Points that require special attention. (page xx) Refer to the page indicated for detailed information. You may find the answers to questions or problems concerning camera operation in - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 5
h Charging takes approximately 2 hr. 30 min. Battery pack charger Battery pack [o] mark CHARGE indicator To power outlet 2 Open the battery/card compartment cover, and insert the battery pack. h The battery/card compartment cover is located on the bottom of the camera. h Press the ON/OFF button to - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 6
ready to go i Sanyo declines any claim for compensation for recorded contents etc. in case of photographing or recording failure due to a chance camera or card flaw. Shooting 1 Press the [m] button. h The shooting mode menu appears. Single-shot Sequential shots Video clip recording Shutter button - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 7
of the selected video clip begins. h If the playback button [=] is pressed again, the display changes to the Shooting Screen. [l] / [m] buttons PLAY Video clip pattern When you are finished taking pictures... Press the ON/OFF button to turn the camera off. English vi - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 8
manual referred to as Photoshop Album SE) program in the supplied SANYO Software Pack lets you easily copy the data from your camera About the Kodak online service> h When the installation window closes, a dialog box to connect to the website introducing Kodak's online service appears. Check the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 9
the supplied dedicated USB interface cable to connect your camera to the computer. h Connect the cable between the camera's USB/AV terminal and the computer's USB connector. 2 Turn on the camera (page 23). h The USB Connection Screen appears on the camera's monitor. USB CONNECTION COMPUTER PRINTER - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 10
4 Select "CARD READER", and press the SET button. h The screen to import data to the computer appears on your computer's monitor. 5 Click the [IMPORT] button. h Copy the camera data to the following folder: My Pictures\Adobe\Digital Camera\Date folder h When the data has been successfully copied - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 11
7 Click the close button. h Photoshop Album SE closes. About video clip files recorded with this camera h You can use Apple's QuickTime 3 or later version to play back video clips on a computer. h QuickTime can be downloaded from the following website: http://www.apple.com/quicktime English x - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 12
ACCESSORIES 8 GETTING THE MOST OUT OF YOUR CAMERA 11 SYSTEM MAP 14 „ SETUP PARTS NAMES 15 CHARGING THE BATTERY PACK 17 INSTALL THE BATTERY PACK AND CARD 21 TURNING THE CAMERA 66 TOUCH SENSOR (TOUCH FOCUS) SETTING 69 RESOLUTION/VIDEO SIZE SETTING 70 COMPRESSION RATE SETTING 73 FOCUS AREA - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 13
114 RESETTING THE CAMERA SETTINGS 116 CHECKING THE REMAINING INTERNAL MEMORY AND CARD MEMORY 117 CHECKING THE REMAINING BATTERY CHARGE 119 „ OTHER DEVICES AND CONNECTIONS CONNECTING TO A TV 121 DIRECT PRINTING 122 „ APPENDICES COMMONLY ASKED QUESTIONS 130 TROUBLESHOOTING 136 SPECIFICATIONS - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 14
Your camera has functions Additional functions Getting started shooting • "Recording a video clip" on page 49 • "Shooting single shots" "FOCUS RANGE" (macro mode) on page 63 For more accurate focus • "FOCUS RANGE" (manual focus) on page 63 Set the focus to a narrow range • "FOCUS AREA SETTING" on - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 15
FLASH SETTING" on page 59 • "USING THE SCENE FUNCTION" (night view portrait mode/fireworks mode/lamp mode) on page 53 Increase the camera's sensitivity • "ISO SENSITIVITY" on page 77 Photographing people • "USING THE SCENE FUNCTION" (portrait mode/night view portrait mode/cosmetic mode/face chaser - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 16
QUICK SEARCH BY OPERATION Playback Basic operation Convenient functions Additional functions Getting started viewing images • "Playing back the video clip" on page 50 Adjust the playback volume • "SOUNDS" on page 105 • "Viewing still images" on page 39 Search for image data • "9-image display - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 17
date imprint • "PRINT SETTINGS" on page 95 View the settings that were in effect when the image/audio data was recorded • "DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN)" on page 101 English 6 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 18
on page 14 in the SANYO Software Pack INSTRUCTION MANUAL Playback • "About video clip files recorded with this camera" on page 8 in the SANYO Software Pack INSTRUCTION MANUAL Using as a webcam • "USING AS A PC CAMERA" on page 16 in the SANYO Software Pack INSTRUCTION MANUAL Record an image of the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 19
-ion battery pack (battery pack): 1 i Lithium-ion battery pack charger and power cord i Dedicated USB interface cable: 1 i Dedicated AV interface cable: 1 i "SAFETY MANUAL" (safety precautions booklet) Please read this booklet carefully before using the digital camera. i Quick Guide English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 20
CHECKING THE INCLUDED ACCESSORIES Attaching the handstrap 9 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 21
can be used with this camera The types of card that can be inserted into and used with this camera are: i SD Memory Card i SDHC Memory Card What "card" means in this manual i In this manual, SD Memory Cards and SDHC Memory Cards that can be used in this digital camera are referred to as "card - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 22
It's loaded with lots of functions that are possible only in a digital camera, including a super-quick focus, an easy-to-understand guidance display on a large screen, a more extensive scene function, and more. You'll never miss a photo opportunity, thanks to the quick focus: Touch focus (page - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 23
from a variety of preset settings (aperture, shutter speed, etc.) for specific shooting conditions. AUTO Use auto settings k Photo correction feature (page 87) Your camera can correct some problems in still images-red eyes resulting when the flash is used (red-eye effect) and blurred images due to - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 24
GETTING THE MOST OUT OF YOUR CAMERA k Date/time stamp feature (page 81) Use the "date stamp feature" to print the capture date and time on your photo, even if your printer does not have a date stamp function. 2008.12.24 13 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 25
The included accessories can be used to connect your camera to a computer, printer or TV. By connecting the camera to your computer printed there. Internet Computer Dedicated USB interface cable Printer Dedicated AV TV interface cable Battery charger (supplied) Commercially available SD - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 26
SETUP PARTS NAMES Front Shutter button ON/OFF button Flash Lens Self-timer indicator Bottom Microphone Battery/card compartment cover Speaker Tripod stand hole 15 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 27
Rear Strap holder USB/AV terminal cover Zoom switch Playback button [=] [n] button [m] button Monitor SET button SCENE button [o] button MENU button [l] button English 16 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 28
to the socket on the battery pack charger. h Insert the connector straight and securely. Battery pack charger Power cord 2 Insert the battery pack in the battery charger. h Insert it in the direction indicated by the [o] mark on the battery pack. Battery pack charger Battery pack [o] mark CHARGE - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 29
pack Be sure to fully charge the supplied or separately sold battery pack before using it in your camera. For charging the battery pack, use the supplied charger. Charge the battery pack if it is being used for the first time, and recharge it whenever the remaining charge is low (see "CHECKING - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 30
Flashing Problem with the battery pack or battery pack charger i Immediately remove the battery pack from the charger. i Do not use an abnormal battery pack. (The usable life of the battery pack has probably expired.) CAUTION Do not charge the battery pack immediately after the camera has - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 31
about 2 days. In the fully charged state, the backup battery will maintain the camera settings for about 7 days. When not using the camera for a long time, remove the battery pack i A small amount of power is still used even if the digital camera is turned off, and it is therefore recommended that - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 32
card can be used after it has been formatted with the camera (page 114). i Make sure that the battery pack and card orientation are correct. 1 2 [o] mark Open battery/card compartment cover on the bottom of the camera. Insert the battery pack. 3 4 Insert the card all the way until it clicks - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 33
shown on the monitor to let you know that the images you capture will be saved to the camera's internal memory. Warning concerning battery pack temperature i If the battery pack in the camera becomes too hot, a blinking temperature warning icon \ will appear on the monitor. If the blinking icon does - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 34
1 Press the playback button [=] for at least one second. h The Playback Screen appears on the monitor (pages 39 and 50). Monitor Playback button [=] Turning off the camera 1 Press the ON/OFF button. h The camera turns off. h When the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 35
You can change the setting for the time elapsed before the camera automatically turns off (page 110). i When the camera is connected to a computer or printer using the dedicated USB interface cable, the auto power save function is disabled, and the camera turns off after about 12 hours. HINT If the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 36
p.m. on December 24, 2008 1 Press the ON/OFF button to turn the camera on, and press the MENU button. h The Recording Menu appears (page 67 SET", and press the SET button or the [m] button. h The Clock Set Screen appears. h The current date and time settings are shown. h Follow the procedures below - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 37
4 Set the date and time. 1 Press the [n] or [o] button to change the year indication. h You can press the [m] button to select the indication you wish to change. h Repeat these steps to select the month indication and day indication, and set the date to December 24, 2008. 2 Press the [m] button to - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 38
lost. (The backup will last for about 7 days.) It is recommended to check that the date and time settings are still correct after replacing the battery pack and before shooting or recording of any type (follow steps 1 to 3). To correct the date and time settings i In step 4, select the indication - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 39
BASIC OPERATION BEFORE TAKING PICTURES How to hold the camera Hold the camera securely, keeping your elbows close to your body and making sure the camera is stable. Correct hold Incorrect hold A finger is blocking the lens or flash. Make sure that the lens and flash are not blocked by your - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 40
At the same time, the touch sensor is temporarily deactivated whenever the Recording Menu (page 66) is displayed, thereby facilitating operation of these screens. Furthermore, you can also deactivate the touch sensor so that the autofocus operates only when you press the shutter button halfway (page - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 41
incorrect focus The following examples are some of the situations where the autofocus function may not work. i Subjects with low contrast, very bright subjects at the center of the image or framing the subject vertically, then re-orient the camera to compose a horizontally framed image. English 30 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 42
examples are some of the situations where the autofocus function may work, but not as desired. i When both near and far the focus on an object at the same distance as the desired subject, then reposition the camera to compose the picture. i Fast-moving subjects Use the focus-lock function to lock - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 43
mode Switch between shooting and playing. 1 Press the ON/OFF button to turn the camera on. ON/OFF button Playback button [=] 2 Press the playback button [=]. h Each time the playback button is pressed, the camera switches between the shooting mode and the playback mode. 149 100 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 44
single still photos (single-shot mode), record video clips (video clip recording mode), and also capture a series of still photos (sequential shots mode). 1 Press the ON/OFF button to turn the camera on. ON/OFF button 2 Press the [m] button. h The screen to set the shooting mode and the selftimer - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 45
"normal display mode" in which the setting indications are turned off, providing a full view of the subject. 1 Press the ON/OFF button to turn the camera on. ON/OFF button SET button 2 Press the SET button. h Each time the SET button is pressed, the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 46
of the monitor is adjustable. Adjust the brightness to the optimum readability in the ambient light. 1 Press the ON/OFF button to turn the camera on. ON/OFF button 2 Press the MENU button for at least 1 second. h The monitor brightness menu appears. 3 Press the [n] and [o] buttons to adjust the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 47
sound data is recorded in the camera's internal memory or on the card installed in the camera. i When a card is installed in the camera, the data is recorded on the If no card is installed, the data is recorded in the camera's internal memory. Taking pictures in backlight conditions... i When taking - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 48
. For more information about taking sequential shots, please see page 47. Shooting single shots 1 Set the camera to the single- shot mode (page 33). Shutter button 2 Rest your finger on the shutter button. the shutter button halfway. F5.2 1/102 Single-shot icon 37 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 49
, for example, by changing the shooting F5.2 1/102 angle. i The large target mark appears when the camera focuses on a wide area in Shutter speed Aperture the center of the screen. About the focus indicator Motion alert icon i A green focus indicator appears when the subject is successfully - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 50
next image. To display the previous image: Press [l]. To display the next image: Press [m]. h To return to Shooting Screen, press the playback button 2008.12.24 [=]. h When the playback button [=] or ON/OFF button is pressed - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 51
the SET button. Instead of pressing the SET button, you can press [T] ([]]) on the zoom switch to show the image full screen. SET button Arrow buttons Video clip Orange frame Still image 100 0001 0002 0003 0004 0005 0006 0007 0008 0009 Audio recording Folder number Image number English 40 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 52
playback A convenient way to quick-search when there are many images. 1 Access the 9-image display screen (page 40). 2 Press [W] ([P]) on the zoom switch. 1/9 h The Quick Scroll Playback Screen appears. h Press the [G] or [H] button to display the previous or following image. h You can - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 53
, or to search for an image that was recorded using Screen Capture (page 23 in the SANYO Software Pack INSTRUCTION MANUAL). 1 Access the Quick Scroll Playback Screen (page 41). 2 Press [W] ([P]) on the zoom switch. h The Select Folder Screen appears. 3 Select the desired folder, and press the SET - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 54
CAPTURING AND PLAYING BACK STILL IMAGES Magnifying (zooming in) the image 1 Display the image that you want to magnify. 2 Press [T] ([]]) on the zoom switch. h Magnification is enabled. h The image is magnified, and the central portion of image is displayed. h Press the arrow buttons to view - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 55
. To go back: Magnification decreases with each press of [W] ([P]) on the zoom switch. h Press the SET button again to return to the normal size (100%) screen. SET button Arrow buttons 1140% Press shutter to save 100% Move English 44 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 56
delete procedure with the card installed in the camera. To delete files from the camera's internal memory, remove the card before performing the delete procedure. 2 Set the camera to the playback mode, and press the [n] button. h The Delete Screen appears. DELETE ALL FILES: Deletes all the files - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 57
file> 1 Use the [l] and [m] buttons to display the file you wish to delete. 2 Press the [n] or [o] button to select "1 FILE". h There is no confirmation screen when deleting single files. Before pressing the SET button in step 3, please make sure that the displayed image is one you wish to delete - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 58
SHOOTING SEQUENTIAL SHOTS When the shutter button is pressed, still images are captured in succession. 1 Set the camera to the sequential shots mode (page 33). Sequential shots icon 143 2 Press the shutter button to start shooting. h Shooting sequential shots begins. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 59
HINT About the focus when shooting sequential shots i When sequential shots are captured, the autofocus operates when the focus lock is activated, fixing the focus. Can the self-timer and/or flash be used? i The self-timer and flash do not operate when shooting sequential shots. i The following - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 60
CLIP RECORDING AND PLAYBACK Recording a video clip 1 Set the camera to the video clip recording mode (page 33). 2 Press the shutter button. h Video clip recording begins. During recording, the length of the video clip and the remaining recording time available are shown on the monitor. h It is - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 61
pressed to turn the camera on, however, press the playback button [=] for at least 1 second. h The video clip just recorded appears on the monitor. h Video clips are indicated by a video clip pattern along the top and bottom of the screen. 5 Press the SET button. h Video clip playback begins. h To - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 62
VIDEO CLIP RECORDING AND PLAYBACK Outline of playback operation To do this... Stop playback Pause To extract a still image Do this During playback, press the [o] button. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 63
to a computer to be played back, the computer may not be able to play back the video fast enough, making it appear jerky. (The video will always be displayed properly on the camera monitor.) If video clip recording stops even when there is card memory remaining... i Depending on the card you are - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 64
specific shooting conditions. 1 Set the camera to the shooting mode (page 32), and press the SCENE button. h The screen to select a scene function appears. Shooting mode setting sOX X Auto The camera makes the optimum settings. m m m Y Capture a split-second image Sports of a fast-moving - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 65
3 Press the SET button. h This completes the scene select setting. h The display returns to the Shooting Screen. h The scene function setting is shown on the monitor. Shooting mode setting sOX m n n m n n m m* m* m m m m m m m m m m m m m m m 6 Scene function setting - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 66
a scene function, you can add an audio track (about 10 seconds maximum) to a captured still image. This audio track is called a "voice memo". 1 On the screen to select a scene function (page 53), select a, and press the SET button. 2 Press the shutter button to take the picture, then speak into the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 67
to use the best shot feature 1 Set the camera to the single-shot mode; on the screen to select a scene function (page 53), select the [l] and [m] buttons to view the previous or next image. h To return to the screen in step 2, press the MENU button. 4 With the full-size view of the image you wish - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 68
(page 37). h The camera focuses on the subject and the exposure is adjusted. h When the face is in focus, the green frame changes to orange. 4 Press the shutter button. h The image is captured. CAUTION i The digital zoom is disabled. i The face chaser function does not work when zooming in or out - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 69
has two zoom functions: optical zoom and digital zoom. 1 Set the camera to the shooting mode (page 32), and point the camera lens at the subject. Zoom switch [W]/[T] 2 Press the zoom switch to compose the desired image. [T]: Zoom in on the subject. [W]: Zoom out. h When the zoom - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 70
when capturing an image in a location where flash photography is prohibited, or when shooting a night landscape scene (flash off). Flash menu J: The digital camera will detect the subject brightness and use the flash only when required. At this time the flash will operate in a manner that - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 71
When auto is selected... i The k icon indicating the flash setting is not shown on the Shooting Screen. When auto or red-eye reduction is selected... i When the subject is in focus, if the camera determines that the flash is necessary, a k or J icon appearing on the monitor indicates that the flash - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 72
SELF-TIMER Self-timer photography is available in the single-shot mode. 1 Set the camera to the single-shot mode (page 33), and press the [m] ( ) button. h The self h The self-timer is set, and you are returned to the Shooting Screen. [m] ( ) button PHOTOGRAPH 1 IMAGE 1 Self-timer menu 61 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 73
HINT i The countdown time until shutter release is shown graphically on the monitor. F5.2 1/102 To pause or cancel the self-timer function... i If the shutter button is pressed again before the shutter is released, the self-timer countdown temporarily stops. Press the shutter button one more time - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 74
ft.) to ∞ i Wide end: At maximum aperture setting: 45 cm (17.72 in.) to ∞ At minimum aperture setting: 28 cm (11.02 in.) to ∞ i Tele end: At maximum aperture setting: 4.8 m (15.75 ft.) to ∞ At minimum aperture setting: 4.2 m (13.78 ft.) to ∞ *: The camera automatically focuses - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 75
Press the [n] or [o] button to select the desired focus range, and press the SET button. h The specified focus range is set, and the camera returns to the Shooting Screen. HINT i In the single-shot mode and sequential shots mode, when the focus range is set to macro +, the zoom is automatically set - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 76
[m] button to adjust 80cm the focus distance, and press the SET button. h The focus distance is set, and you are returned to the Shooting Screen. HINT About the focus range i The focus distance indication shows the distance between the lens surface and the subject. i In some cases there may - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 77
SHOOTING ACCESSING THE RECORDING MENU Detailed shooting settings are accessed from the Recording Menu. 1 Set the camera to a shooting mode (page 33). 2 Press the MENU button. h The Recording Menu corresponding to the shooting mode set in step 1 appears. h The Recording Menu can - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 78
ACCESSING THE RECORDING MENU Overview of the Recording Menu RECORDING MENU 1/2 1 TOUCH SENSOR 2 RESOLUTION 10M 3 COMPRESSION 4 FOCUS MODE 5 EXP MEASURE 6 ISO OK EXIT 7 WHITE BALANCE 8 EXP COMPENSATION 0 9 INSERT DATE ON IMAGE OFF i 7 through 9 are displayed when you press the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 79
2288 × 1712 pixels t: Shoot at 1600 × 1200 pixels [: Shoot at 640 × 480 pixels d: Shoot at 640 × 480 pixels 5: Shoot at 320 × 240 pixels : The camera will determine the setting automatically. r: For photography in fair weather - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 80
selected touch sensor function is set. CAUTION i When the camera is attached to a tripod, the touch sensor sensibility may be diminished. This happens because the touch sensor works by detecting changes in the capacitance when the camera is touched with bare hands. The touch sensor sensibility will - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 81
D: Shoot image at 2816 × 2112 pixels z: Shoot image at 2288 × 1712 pixels t: Shoot image at 1600 × 1200 pixels [: Shoot image at 640 × 480 pixels d: Shoot at 640 × 480 pixels 5: Shoot at 320 × 240 pixels - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 82
SIZE SETTING Record and play back an audio file In the video clip recording mode, your camera can make audio recordings. The audio recordings are monaural. k Record an audio file 1 Display the Recording Menu for the video clip recording mode (page 66). 2 Select the audio recording icon < from - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 83
k Playing back audio recordings 1 Display the desired audio data. h A musical note graphic appears on the screen. 101-0018 2 Play back the recording. PLAY 2008.12.24 To do this... Do this Forward playback Press the SET button. Stop playback During playback, - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 84
COMPRESSION RATE SETTING Set the data compression rate when shooting images. Even if the same resolution is used, you can change the compression setting to decrease the image data size so that you can capture more images, or increase the image data size for no loss in image quality. 1 Display the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 85
determined from 9 different focus points within the shooting area visible on the monitor. When the image is focused, a target mark & appears. Spot focus: The camera focuses on the subject in the center of the monitor. AF seeker: Once the focus is locked on a subject (page 37), it follows the subject - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 86
mark appears on the focused subject. i During focus-lock, even if the focused subject moves, the seeker mark automatically follows the subject. i If the camera loses the focus-lock on the subject, the seeker mark disappears. i In dark environments, the seeker mark may follow the subject more slowly - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 87
3 types of light-measuring modes. Multi-section light-measuring: The exposure is adjusted after sampling from multiple areas of the entire shooting screen. Center-weighted light-measuring: The exposure is adjusted after light is measured from the entire image, but with emphasis on the center area - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 88
clip recording mode: ISO3600). 6: Sets the sensitivity to ISO800 (video clip recording mode: ISO7200). -: Sets the sensitivity to ISO1600 (video clip recording mode: ISO7200). S: Sets the sensitivity to ISO2500 (video clip recording mode: ISO7200). 3 Select the desired icon, and press the SET button - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 89
images in darker locations, but noise in the captured images may increase. CAUTION Does the image appear to flicker when recording a video clip? i If recording a video clip under fluorescent lights with the ISO sensitivity set to w or higher, a noticeable flicker may appear in the image. English 78 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 90
or change the overall tone of the image, the white balance can be manually set. 1 Display the Recording Menu (page 66). 2 Select "WHITE BALANCE" and press the SET button. h The white balance menu appears. >: The camera will make the white balance adjustment automatically based on the natural and - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 91
When capturing images, you can make the image lighter or darker. 1 Point the camera lens at the subject, and display the Recording Menu (page 66). 2 Select "EXP COMPENSATION" and press the SET button. h The screen to adjust the exposure appears. 3 Use the [n] and [o] buttons to select the desired - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 92
sequential shots speed may become slower. If the imprinted date is shown as i The date and time settings have not yet been completed. Set the camera to the correct date and time (page 25). 81 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 93
1 (BASIC SETTINGS) DISPLAYING THE PLAYBACK MENU The Playback Menu is used to adjust your camera's playback settings. 1 Press the playback button [=]. h The display changes to the Playback Screen. Playback button [=] 2 Press the MENU button. h The Playback Menu appears. h The Playback Menu is - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 94
still images. 4 [Blur correction] (page 87) h Correct the effects of camera shake in still images. 5 [Contrast correction] (page 89) h Add Copy files from the card to the internal memory, or vice versa. 9 [Print instructions] (page 95) h Specify the print settings. i 7 through 9 are displayed - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 95
the data that you want to protect from accidental erasure, and display the Playback Menu (page 82). 2 Select "PROTECT" and press the SET button. h The screen to set the protect setting appears. Lock the file? YES EXIT OK 3 Select "YES" and press the SET button. h The protect mode is set for - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 96
for viewing. 1 Display the image you wish to rotate, and display the Playback Menu (page 82). 2 Select "ROTATE" and press the SET button. h The screen to rotate the image appears. Rotate image? 3 Select "YES" and press the SET button. h Each time the SET button is pressed, the image is rotated - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 97
the still image whose size you want to change, and display the Playback Menu (page 82). 2 Select "RESIZE" and press the SET button. h The screen to change the still image resolution appears. Change image resolution? (1600×1200) (640×480) OK 3 Select the new image size. 2M (1600 × 1200): The - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 98
BLUR CORRECTION Correct the effects of camera movement (camera shake) to produce a sharper image. 1 Display the image to be modified, and display the Playback Menu (page 82). 2 Select "BLUR CORRECTION", and press the SET button. h The Blur Correction Screen appears. YES: Proceed with the blur - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 99
to the Blur Correction Screen. SAVE AS NEW: The camera was not able to successfully repair the image. i The correction function works to automatically edit flaws that the camera detects in captured images. In some cases, the camera captured using a different digital camera. Also, blur correction - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 100
the contrast? YES EXIT OK 3 Select "YES", and press the SET button. h Image processing begins. h During image processing, "Processing" is shown on the screen. h In some cases, it may take several seconds to process the image. h When processing is completed, the modified image is shown. Check the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 101
desired method to save the modified image, and press the SET button. h The modified image is saved, and you are returned to the Contrast Correction Screen. HINT Concerning the date and time information for the modified image i The date display that is shown when an edited image is played back is - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 102
the image to be modified, and display the Playback Menu (page 82). 2 Select "RED-EYE CORRECT.", and press the SET button. h The Red-eye Correction Screen appears. YES: Proceed with the red-eye correction. EXIT: Return to the Playback Menu. Correct red-eye effect? YES EXIT OK 3 Select "YES", and - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 103
image is saved, and you are returned to the Red-eye Correction Screen. HINT If the "Red-eye correction not successful" message appears... i The camera was not able to successfully correct the red-eye effect. i The red-eye correction function works to automatically edit the red-eye effect that the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 104
the card, and likewise from the card to the internal memory. 1 Insert the card in the camera (page 21). 2 Display the Playback Menu (page 82). 3 Select "FILE COPY" and press the SET button. h The screen to copy files appears. Copy file? 4 Select the copy direction. INT MEM CARD: Copy image data - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 105
select the type of copy appears. h The copy source image is shown in the background on the screen. COPY SINGLE: Copy the data for one image. COPY ALL: Copy all the data from the copy source to the copy destination. INT MEM CARD - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 106
digital print services. Moreover, this camera is DPOF-compatible, so you can use the camera to specify the number of prints, or whether or not the date is displayed on the print. Display the screen to set the print settings 1 Display the Playback Menu (page 82). 2 Select "PRINT INSTRUCTIONS - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 107
a printer or have the digital print service shop print out a still image from a video clip, you must first save it (extract still) as a still image (page 52). About the DPOF format i DPOF (Digital Print Order Format) is a print order format. You can connect your camera to a DPOF-compatible printer - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 108
The set print settings are applied to all the still images on the card. Specify the printing instructions? EACH IMAGE ALL IMAGES ALL CLEAR OK 3 Press the SET button. h The Date/Copies Print Screen appears. h If "EACH IMAGE" was selected, press the [l] or [m] button to display the desired image to - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 109
This completes the settings for the number of prints and date imprinting. h If you press the MENU button, you are returned to the screen to set the print settings (step 1). EACH IMAGE : : 0 1 OK DATE EACH IMAGE : : 0 1 OK DATE EACH IMAGE : : 1 1 OK DATE CAUTION i Do not specify dated - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 110
the print settings for all images. 1 Display the screen to set the print settings (page 95). 2 Select "ALL CLEAR". Specify the printing instructions? EACH IMAGE ALL IMAGES ALL CLEAR OK 3 Press the SET button. h The Confirm All Clear Screen appears. YES: Clear the print settings for all images - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 111
SLIDESHOW PLAYBACK 1 Display the Playback Menu (page 82). 2 Select "SLIDESHOW" and press the SET button. h The screen to set the slideshow appears. TIME: Adjust the transition speed (the period that an image is displayed before it changes to the next image). EFFECT: - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 112
second. 1 2 h The Information Screen appears. h If the MENU button is pressed again, the Information Screen is canceled. 1 Resolution setting 2 setting A Video size setting/ audio file indicator B Resolution and frame rate A C File format D Playback time E Remaining battery power C - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 113
THE OPTION MENU The Option Menu is used to adjust various camera settings. 1 Display the Recording Menu or Playback Menu. h OK 1sec 0 NTSC EXIT To exit the Option Menu To return to the Shooting Screen or Playback Screen → Press the MENU button. To return to the Recording Menu or the Playback Menu - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 114
DISPLAYING THE OPTION MENU Overview of the Option Menu OPTION MENU 1/2 1 CLOCK SET 2 SOUND 3 POST VIEW 1sec 4 BRIGHTNESS 0 5 LANGUAGE 6 TV SYSTEM NTSC OK EXIT 7 AUTO POWER OFF 8 FILE NO. CONT'D 9 FORMAT @ RESET SETTINGS 103 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 115
the language in which the monitor messages are displayed. 6 [TV system setting] (page 109) h Select the type of TV signal that is output from the camera's USB/AV terminal. 7 [Auto power off] (page 110) h Specify the time elapsed before the auto power off function operates to turn the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 116
is pressed. KEY SW: Select the sound that is produced when a camera button (SET button, MENU button, etc.) is pressed. AUDIO GUIDE: Mute or enable the camera's audio help guide. PLAY VOLUME: Adjust the volume for playing back video clips and audio files. SOUND OPERATION VOL 3 TURN ON/OFF ON - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 117
the desired item, and press the SET button. 4 Press the [n] or [o] button to change the setting. h The respective screen to enable or disable the sound appears. ON: Activates the sound. OFF: Deactivates the sound. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 118
POST-VIEW SETTING Specify the duration that the captured image appears on the monitor (postview) after the shutter button is pressed. 1 Display the Option Menu (page 102). 2 Select "POST VIEW" and press the SET button. h The Post View Menu appears. 1sec: The post-view image is displayed for 1 second - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 119
LANGUAGE You can set the monitor of your camera to display the messages in any one of several languages. 1 Display the Option Menu (page 102). 2 Select " LANGUAGE" and press the SET button. h The screen to select the display language appears. LANGUAGE OK 3 Select the desired language, and press - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 120
type of image signal that is output from your camera's USB/AV terminal. 1 Display the Option Menu (page 102). 2 Select "TV SYSTEM" and press the SET button. h The TV System Menu appears. NTSC: Outputs NTSC video signals. PAL: Outputs PAL video signals. 3 Select the desired setting, and press the SET - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 121
turns off after a specified period of inactivity. The auto power off function works to conserve the battery pack power when the camera is not being used, or to prevent the battery pack from dying if the camera has accidentally been left on. You can specify the elapsed time (standby time - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 122
or the card is replaced with another card, the consecutive numbering of file names continues from the last number recorded by the camera. File name (image number) Card A 0001, 0002 ...... 0012, 0013 Replace card Card B 0001, 0002 ...... 0012, 0013 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 123
..... 0012, 0013 Replace card Card B 0020, 0021, 0022, 0023 ..... 0025, 0026 Previously recorded files HINT What about the internal memory? i The file number reset function works the same for the internal memory. English 112 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 124
FILE NO. MEMORY 1 Display the Option Menu (page 102). 2 Select "FILE NO. CONT'D", and press the SET button. ON: The file number memory function is on. OFF: The file number memory function is off. 3 Select the desired setting, and press the SET button. h The selected file number memory function is - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 125
or i If it was formatted using a personal computer or another digital camera. The card cannot be reformatted if the lock switch is set to : The entire card is scanned and reformatted. h The screen to confirm formatting appears. h Follow steps 5 and 6. FORMAT ( CARD) FORMAT - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 126
Select the desired format option, and press the SET button. h The screen to confirm formatting appears. 5 Select "YES". 6 Press the SET button from a reformatted card using special software for that purpose. However, if the camera is used to execute a full format, it will be impossible to recover - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 127
to the factory-preset settings. NO: Do not change the settings, and return to the Option Menu. 3 Select "YES", and press the SET button. h The camera settings are reset to the factory-preset settings. HINT i Note that the following settings do not change with this procedure: Date and time setting - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 128
"Possible Number of Images/Video Recording Time/Audio Recording Time" on page 147. 1 Press the ON/OFF button to turn the camera on. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 129
For audio data 1 Set the camera to the audio recording mode (page 71). h The remaining audio recording time is shown. Remaining recording time 13:23:29 HINT i When the remaining number of images or the remaining video recording time is "0", you cannot capture any more images. To capture more - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 130
this indicator before capturing an image. For an indication of the possible length of time for battery pack operation, see page 146. 1 Press the ON/OFF button to turn the camera on. h The battery pack remaining charge indicator appears in the lower right corner of the monitor. h Due to the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 131
HINT i If any data is present, you can also check the remaining battery pack charge on the Information Screen (page 101). i Battery life may differ even among battery packs of the same type. i Depending on the usage of the camera (such as the number of times the flash is used, etc.) or the ambient - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 132
TO A TV Connect the supplied AV interface cable from the USB/AV terminal on the digital camera to the AUDIO and VIDEO input terminals on the TV. Yellow plug To the VIDEO input terminal Supplied dedicated AV interface cable To the USB/AV terminal Switch input to VIDEO White plug To the AUDIO input - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 133
Turn the printer on, use the supplied USB interface cable to connect the camera to the printer. h Connect the camera's USB/AV terminal to the printer's USB connector. h The USB Connection Screen appears on the camera's monitor. USB CONNECTION COMPUTER PRINTER CANCEL OK SELECT Supplied dedicated - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 134
not operate correctly. If the camera does not operate correctly, disconnect the USB interface cable, turn off the camera, and then reconnect the cable. i During PictBridge printing, the camera's button operation response is slower. i If the camera is powered by the battery pack for printing, make - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 135
To select one image and print it (print selected image) Procedure to select one still image and print it. 1 Complete the printing setup (page 122). 2 Press the [l] or [m] button. h Display the image you wish to print. Print this image? : 1 : 1 PRINT DATE English 124 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 136
button. h Printing begins. Print this image? : 1 : 1 PRINT DATE HINT To cancel printing 1 During printing, press the [o] button. h The Confirm Cancel Printing Screen appears. 2 Select "YES", and press the SET button. h If "EXIT" is selected and the SET button is pressed, printing resumes. CAUTION - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 137
122). 2 Press the MENU button. h The PictBridge Menu appears. 3 Select "PRINT ALL IMAGES", and press the SET button. h The Print All Images Screen appears. 4 Specify the number of prints or date-imprinted prints. h Press the [n] or [o] button to specify the number - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 138
IMAGES DPOF OK EXIT 3 Select "DPOF", and press the SET button. h The Print Scheduled Images Screen appears. h An image that is set to print (page 95) is displayed. Print the DPOF images is used that does not support your camera's DPOF function. i Multi-prints are not possible. 127 English - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 139
To change the printer settings and print images (change printer settings) Images are printed according to settings specified by the camera, such as paper type, size, layout, printing quality, etc. 1 Complete the printing setup (page 122). 2 Press the MENU button. h The PictBridge Menu appears. 3 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 140
buttons to select a printer setting parameter, and press the SET button. h The screen to set the selected parameter appears. 2 Press the [n] or [o] button to your camera's Printer Settings Menu, select "V VALUES". i If a function set by the camera is not available in the printer, the camera's printer - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 141
the touch sensor work? Why doesn't the flash operate? Answer Due to cold temperatures, the battery pack temporarily lost its power. The ambient temperature is very low. The battery pack life has expired. The remaining battery pack power is low. You are wearing gloves. The camera has determined that - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 142
photo (photo service) sizes. [: For photos displayed on a web page, or sent as e-mail attachments. Because shooting with the optical zoom uses the optics of a physical lens, you can shoot without losing minute details in the image. The digital zoom, on the other hand, works by magnifying a portion - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 143
- Condition due to the liquid crystals. Action Set the scene function to the landscape \ mode when photographing. Or, set the focus range setting to manual focus -, and set the distance to ∞. Not a malfunction. Spots that appear in the monitor only appear in the monitor and will not be recorded - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 144
. The focus is not locked properly. Zoom jump playback does not work for an image that was created from a magnified portion of a zoom jump image, or for video clips. This may happen when trying to play back images stored on a card from a different digital camera. If a bright subject is shot in the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 145
to the characteristics of the camera, magnified images appear less clear. The image was captured using the digital zoom. - There is a problem with the printer. There that has been edited using a computer. Please refer to the instruction manual for your printer. Delete unnecessary data, or use a card - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 146
may be the cause. Can I use my - camera abroad? Why does the "System error" message appear? A problem has occurred within the camera or card. Action Remove the battery pack from the camera, wait a few minutes, then reinstall the battery pack and try again. If you have questions about using - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 147
TROUBLESHOOTING Before taking your camera to the repair shop, check the following table for a possible solution to the problem. CAMERA Problem No power. Power Shooting The camera turns off by itself. An image is not captured when the shutter button is pressed. Cause The battery pack is dead. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 148
TROUBLESHOOTING Shooting Problem An image is not captured when the shutter button is pressed. The operation buttons (arrow buttons, MENU button, etc.) do not work. The flash does not operate. The "Battery depleted" message appears. Cause The maximum number of images that can be captured or the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 149
Problem Cause Shooting Monitor When zooming in or out, the zoom movement stops momentarily. There is noise in the captured image. When recording a video w or less. 77 Press the playback button 32 [=]. Hold the camera correctly, and make sure the 28 flash is not obstructed. Capture the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 150
TROUBLESHOOTING Problem The image is too dark. The image is too bright. exposure correction function. Set the ISO sensitivity to t. Select the correct focus setting for your needs. Hold the camera correctly and press the shutter button correctly. Clean the lens. Reference page 59 80 77 59 80 77 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 151
Problem The indicated in the section "Possible Number of Images/Video Recording Time/Audio Recording Time". Cause This is mode. Set the white balance setting correctly. Hold the camera correctly, and make sure the lens is not obstructed instructions that accompanied the card. Reference page 59 79 28 - - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 152
TROUBLESHOOTING Notes regarding the scene function Y G _ \ ] H r The macro + focus range setting is not available. The pan o, macro + and manual focus - focus range settings are not available. The AF seeker p focus mode setting is not available. The digital zoom is not available. The resolution - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 153
for Camera File system) is standard for digital still camera image files to provide interoperability between digital photography devices for the images stored on removable memory cards. However, it is not guaranteed that all devices will support the DCF standard. Video clips:QuickTime Movie (Photo - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 154
× 1712 pixels t: 1600 × 1200 pixels [: 640 × 480 pixels d: 640 × 480 pixels, 30 frames/second 5: 320 × 240 pixels, 15 frames/second Full-auto TTL, manual setting possible 5.0× optical zoom lens f=6.3 mm to 31.5 mm (35 mm film camera conversion: 36 mm to 180 mm) Autofocus - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 155
Range Digital zoom Shutter speed Sensitivity (standard output sensitivity) Monitor Normal photography: 40 cm Hetc.) (During flash: 1/30 to 1/2,000 sec.) Sequential shots mode: 1/2 to 1/2,000 sec. Video clip recording mode: 1/30 to 1/10,000 sec. Single-shot mode/sequential shots mode (standard output - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 156
working eye reduction TTL-type AF (9-point range finder/spot focus/ AF seeker), manual focus (14 steps) Approx. 2-second delay, 10-second delay 0 to 40°C (operating, no condensation) 10 to 90% (storage, no condensation) Lithium-ion battery pack (DB-L70) × 1 94.2 (W) × 56.4 (H) × 23.4 (D) mm 3.71 - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 157
, NTSC color TV system/PAL TV system (switchable from the Option Menu) USB USB 2.0 Full Speed PC camera: USB video class Battery life Maximum recording time Maximum playback time 220 images: CIPA standard (when a Toshiba 128 MB SD Memory Card is used) 260 minutes: LCD monitor on, - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 158
shows the possible number of captured images and the possible recording time for the camera's internal memory and for the commercially available 2 GB and 8 GB SD Memory Cards. Shooting mode setting Single-shot mode/ Sequential shots mode Video clip recording mode Audio file mode Resolution setting - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 159
× 0.94" (H) × 3.54" (D) Approx. 65 g (2.29 oz.) AC 125 V, 7 A AC 250 V, 2.5 A i The VPC-E10GX model is supplied with a power cord that is appropriate for the region of destination. i When using the supplied battery pack charger abroad, the power cord may need to be replaced in accordance with local - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 160
Pentium are registered trademarks of Intel Corporation (USA). In this manual, the Microsoft® Windows® 2000 operating system, Microsoft® Windows® is a trademark of FotoNation® Inc. Red Eye software© 2003-2005 FotoNation In Camera Red Eye - covered by U.S. Patent No. 6,407,777. Other patents Pending. - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 161
up and ready to go i Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera. i Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure to adhere to the instructions given in this manual, or repairs or changes done - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 162
you snap a picture using the autofocus, the camera automatically adjusts the settings so that the image will be in focus. If you are getting blurred images even when using the autofocus, one or more of the following might be the reason. k How the autofocus works The autofocus is activated when the - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 163
the shutter button is touched lightly, the camera's autofocus works by determining the distance between the camera and the subject. Once the subject is the focus distance, the focus can be more accurate. i When photographing a moving subject, press the shutter - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 164
can get a better picture by using the flash, for example, or changing the exposure setting. Photographing moving subjects (sports mode Y) Points: i Match the camera's movement with that of the subject. i Set the zoom to the Wide end (wide-angle). i Don't be too hesitant to press the shutter button - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 165
, it's better to use the optical zoom. Using the digital zoom produces a coarser image. Hold the camera securely, keeping your elbows close to your body and making sure the camera is stable. Using a tripod or other means of stabilizing the camera will increase the likelihood of getting a clear photo - Sanyo VPC E1 | Instruction Manual, VPC-E10EX - Page 166
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
 |
 |
VPC-E10EX
VPC-E10
VPC-E10GX
INSTRUCTION MANUAL
Digital Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “
SAFETY MANUAL
”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-E10EX, VPC-E10 and
VPC-E10GX.
Any information regarding only one of these products will be labeled as such.