Sanyo VPC-E870 VPC-E870G Owners Manual English - Page 27

Inserting an SD/MMC Memory Card, Charging the Battery, Turning - camera charger

Page 27 highlights

English Camera Setup 13 Inserting an SD/MMC Memory Card The camera features 32 MB internal flash memory but you may also use an optional SD/MMC memory card for additional storage. Follow these instructions to insert the SD/MMC card. 1. Open the battery compartment at the bottom of the camera. 2. Insert the SD/MMC card into the memory card slot as shown. 3. Close the battery compartment. To remove the SD/MMC card, gently push the card until it pops out. Pull out the card carefully. Charging the Battery Insert the battery into the battery charger as shown. Connect the power supply to the charging unit and the mains supply. Turning On Press and hold the Power button to turn on the camera. To turn off the camera, press the Power button again. Inserting an SD/MMC Memory Card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Camera Setup
13
Inserting an SD/MMC Memory Card
English
Inserting an SD/MMC Memory Card
The camera features 32 MB internal flash memory but you may also use an optional
SD/MMC memory card for additional storage.
Follow these instructions to insert the SD/MMC card.
1. Open the battery com-
partment at the bottom
of the camera.
2. Insert the SD/MMC card into the memory card slot
as shown.
3. Close the battery
compartment.
To remove the SD/MMC card, gently push the card until it pops out. Pull out the
card carefully.
Charging the Battery
Insert the battery into the battery charger as
shown. Connect the power supply to the charging
unit and the mains supply.
Turning On
Press and hold the
Power
button to turn on the camera. To turn off the camera,
press the
Power
button again.