Sanyo VPC S6 Instruction Manual, VPC-S6 - Page 144

Viewing images Image editing Misc. Problem The colors of the images captured indoors are not correct. A part of the image is missing. "NO IMAGE" is shown. You cannot edit or rotate an image. The "PROTECTED" message appears and the data cannot be erased. When a 1GB card is used, the recording capacity is less than that indicated in the section "Possible No. of Images/ Possible Shooting Time". Cause This is due to ambient lighting. The white balance setting is incorrect. The handstrap or a finger was blocking the lens or lens opening. There is no image stored in the installed card or the internal memory. The protect mode is set. You have attempted to erase data that is protected from accidental erasure. The recording capacity of the card is less than 1GB. Action Capture the image using the forced flash mode. Set the white balance setting correctly. Hold the camera correctly, and make sure the lens is not obstructed. Play back after capturing images. Cancel the protect mode. Set the protect setting for the data to OFF. Depending on the card, the capacity may be less than 1GB. Please refer to the instructions that accompanied the card. Reference page 37 71 22 27, 32 78 78 146 English 138