Sanyo plc sw30 Owners Manual - Page 32

Video Input Video System Selection 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to AV System Menu icon. 2 Press Point d button to move the red arrow pointer to the system that you want to select and then press SELECT button. Video Jack or S-Video Jack Auto The projector automatically detects incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV SYSTEM MENU (VIDEO OR S-VIDEO) AV System Menu icon This box indicates the system being selected. Move the pointer to the system and press SELECT button. COMPUTER IN / COMPONENT IN Jack ( Y, Pb/Cb, Pr/Cr) Auto The projector automatically detects incoming Video signal, and adjusts itself to optimize its performance. AV SYSTEM MENU (COMPONENT VIDEO) COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i. AV SYSTEM Menu icon This box indicates the system being selected. Move the pointer to the system and press SELECT button. 32