Schwinn 126 Upright Bike Assembly Manual
Schwinn 126 Upright Bike Manual
View all Schwinn 126 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn 126 Upright Bike manual content summary:
- Schwinn 126 Upright Bike | Assembly Manual - Page 1
Do not print this page - Schwinn 126 Upright Bike | Assembly Manual - Page 2
©2006. Nautilus, Inc. All Rights Reserved. Schwinn is a registered trademark. Nautilus, Inc., World Headquarters, 16400 SE Nautilus Dr., Vancouver, WA 98683 - Schwinn 126 Upright Bike | Assembly Manual - Page 3
Upright bike Assembly guide PN 001-6894 Rev C (031308) Assembly Guide - Schwinn 126 Upright Bike | Assembly Manual - Page 4
CONTENTS Table of Contents Hardware 2 Exploded View 3 Parts List 4 Assembly Instructions 5 Important Contact Numbers 17 1 - Schwinn 126 Upright Bike | Assembly Manual - Page 5
Hardware Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270 2 - Schwinn 126 Upright Bike | Assembly Manual - Page 6
EXPLODED VIEW EXPLODED VIEW - Schwinn 126 Upright Bike | Assembly Manual - Page 7
PARTS LIST PARTS LIST Ref. Description Qty A Computer 1 A-1 Screw M5x14L 4 A-2 Computer bracket 1 B Handlebar 1 B-4 Heartrate wire 1 C Handlebar mast 1 C-1 Upper computer wire 1 C-2 Bottle cage 1 C-3 Screw M5x20L 2 C-4 Bottle cage holder - Schwinn 126 Upright Bike | Assembly Manual - Page 8
gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes. 3. As a general rule, and for - Schwinn 126 Upright Bike | Assembly Manual - Page 9
ASSEMBLY INSTRUCTIONS Step 1 Install Front and Rear Stabilizers Parts: • Front Stabilizer (Ref. D ) • Rear Stabilizer (Ref. E ) Tools: • Supplied Allen Wrench 1-1 Attach the Rear Stabilizer (E) to the rear of the Main Unit using two M8 X 16mm - Schwinn 126 Upright Bike | Assembly Manual - Page 10
ASSEMBLY INSTRUCTIONS Step 2 Install Pedals Parts: • Right Pedal (K-R) • Right Pedal (K-L) Tools: • Supplied Pedal Wrench 2-1 Screw the Left Pedal ( has an "L" stamped into the end of the pedal ) into the Left Crank - Schwinn 126 Upright Bike | Assembly Manual - Page 11
ASSEMBLY INSTRUCTIONS Step 3 Install Seat Post Parts: • Seat post (Ref. G) 3-1 Completely unscrew the Seat Post Adjustment Knob (F-7) from the main unit and insert the Seat Post (G) into the hole. Re-install the Adjustment Knob by screwing in firmly into place. G F-7 8 - Schwinn 126 Upright Bike | Assembly Manual - Page 12
ASSEMBLY INSTRUCTIONS Step 4 Install Seat Parts: • Seat (Ref. G-8) Tools: • Supplied Wrench 4-1 Position the Seat (G-8) on the top of the Seat Slider.Tilt the the Seat to desired angle and tighten the - Schwinn 126 Upright Bike | Assembly Manual - Page 13
ASSEMBLY INSTRUCTIONS Step 5 Install Handlebar Mast Parts: • Handlebar Mast (Ref C) Tools: • Supplied Allen Wrench 5-1 Remove the four Allen Bolts (F-4) and Curved Washers (F-1) from the frame . 5-2 Connect the Upper and Lower Computer Wires. ( - Schwinn 126 Upright Bike | Assembly Manual - Page 14
ASSEMBLY INSTRUCTIONS Step 6 Install Handlebar Parts: • Handlebar (Ref B) • Console Slider Adjust Knob (Ref 0-5) • Washer (Ref 0-6) • "T" Nut (Ref 0-8) 6-1 Tuck the Computer Wires into the Mast to allow insertion of the Handlebar . 6-2 Slide - Schwinn 126 Upright Bike | Assembly Manual - Page 15
ASSEMBLY INSTRUCTIONS Step 7 Install Computer Bracket Parts: • Computer Bracket (Ref. A-2) • Angle Adjust Knob (Ref. O) • Carriage Bolt (Ref. O-7) • Screw M8x85 (Ref. O-1) • Angle Adjust Knob to position the Computer to fit individual preferences. O-7 O-1 O-3 A-2 O-3 O-2 Assembled View O 12 - Schwinn 126 Upright Bike | Assembly Manual - Page 16
ASSEMBLY INSTRUCTIONS Step 8 Install Computer Parts: • Computer (Ref. A ) Tools: • Supplied Phillips Head Screwdriver 8-1 Remove the four screws from the back of the Computer. 8-2 Connect the Computer Wire and Heartrate Wire to - Schwinn 126 Upright Bike | Assembly Manual - Page 17
ASSEMBLY INSTRUCTIONS Step 9 Install Bottle Cage Parts: • Bottle Cage A (Ref. C-2 ) • Bottle Cage B (Ref. C-4 ) Tools: • Supplied Phillips Head Screwdriver 9-1 Remove the two M5 x 20L (Ref. C-3) screws from the Mast. 9-2 Align Bottle Cage A and B - Schwinn 126 Upright Bike | Assembly Manual - Page 18
ASSEMBLY INSTRUCTIONS Step 10 Plug in AC Adapter Parts: • AC Adapter (Ref. P) 10-1 Plug the AC Adapter (P) into the recepticle on the rear left of the unit and into a 110 volt outlet. P 15 - Schwinn 126 Upright Bike | Assembly Manual - Page 19
ASSEMBLY INSTRUCTIONS Assembly is complete! Please reference the Owner's Manual for information regarding computer operation, product maintenance, Warranty information, and general fitness and exercise guidelines. 16 - Schwinn 126 Upright Bike | Assembly Manual - Page 20
(800-6288458) For technical assistance and a list of distributors in your area, please call or fax one of the following numbers. • INTERNATIONAL CUSTOMER SERVICE: Nautilus International S.A. Rue Jean Prouvé 6 1762 Givisiez / Switzerland Tel: + 41-26-460-77-77 Fax: + 41-26-460-77-70 Email: technics
Do not print this page