Schwinn 126 Upright Bike Assembly Manual - Page 12
Step 4 Install Seat
View all Schwinn 126 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ASSEMBLY INSTRUCTIONS Step 4 Install Seat Parts: • Seat (Ref. G-8) Tools: • Supplied Wrench 4-1 Position the Seat (G-8) on the top of the Seat Slider.Tilt the the Seat to desired angle and tighten the two nuts on the underside of the Seat until completely tight. Seat Adjustment: To adjust the Seat Post height, unscrew the Adjustment Knob about one full turn and pull outward on the knob. Slide the Seat Post to desired postition. Release the Adjustment Knob (F-7) and allow the Seat Post to lock into place then tighten the Adjustment Knob. Adjust the fore and aft postion wit the Slider knob ( G-1). When properly adjusted, your leg should have a slight bend at the bottom of the pedal stroke. G-8 G-1 F-7 9
9
ASSEMBLY INSTRUCTIONS
Step 4 Install Seat
Parts:
•
Seat (Ref. G-8)
Tools:
• Supplied Wrench
4-1
Position the Seat (G-8) on the top of the Seat Slider. Tilt the the
Seat to desired angle and tighten the two nuts on the underside
of the Seat until completely tight.
Seat Adjustment:
To adjust the Seat Post height, unscrew the Adjustment Knob
about one full turn and pull outward on the knob. Slide the Seat
Post to desired postition. Release the Adjustment Knob (F-7) and
allow the Seat Post to lock into place then tighten the Adjustment
Knob. Adjust the fore and aft postion wit the Slider knob ( G-1).
When properly adjusted, your leg should have a slight bend at
the bottom of the pedal stroke.
G-8
G-1
F-7