Schwinn 213 Recumbent Bike Assembly Manual

Schwinn 213 Recumbent Bike Manual

Get Schwinn 213 Recumbent Bike PDF manuals and user guides View all Schwinn 213 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn 213 Recumbent Bike manual content summary:

  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 1
    213 Schwinn® Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 2
    also located on the computer console mast of the exercise bike. Failure to follow any of these safeguards may result in injury or serious health problems. • Read and understand the Owner's Manual and operation instructions prior to use. If you do not have an Owner's Manual, call 1-800-864-1270 to
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 3
    . This is to ensure adequate clearance for easy access to the bike and to avoid any possible contact with the moving pedals 213 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions Assembly of the 213 Recumbent Bike is divided into 5 easy stages; each comprised of only a few
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 4
    1 1 1 1 4 1 1 5 1 1 1 1 1 1pr 8 1 1 Parts List Description Computer Handlebars Computer Screws Handlebar Post Allen Bolt 8x1.25x16L Wavy Washer Upper HR Wire Rail HR Wire Seat Handlebar Allen Bolt 8 x 1.25 x45L Seat Support Frame Seat Backer/ Read Rack Allen Bolt 8x1.25x35L Seat Adjustment Knob
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 5
    .25x16mm Stage#9 Screws M8xP1.25x16mm Screwdriver Stage#11 Flat Washer ? 8*? 16*2T Allen Bolt M8xP1.25x16mm Allen Key Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 6
    213 Assembly Drawing with Reference Numbers
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 7
    Replacement Parts List Reference # __ 1 __ 2 __ 3 __ 4 __ 5 __ 6 __ 7 __ 8 __ Post Rear Stabilizer Seat Rail Seat Rail HR Wire Seat Handlebar Allen Bolt 8 x 1.25 x45L Seat Support Frame Seat Backer/ Read Rack Allen Bolt 8x1.25x35L Seat Adjustment Knob Flat Washer Seat Back Backer
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 8
    and parts with the enclosed parts list and full size hardware chart. Each step of the assembly process has been broken down into 8 easy-to-follow stages. Please take just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 9
    *2T(item #15) Step 2: Attach the right and left WATER BOTTLE HOLDERS (#31) with the SCREWS (#32) to the underside of the SEAT BOTTOM (#33) using the provided screwdriver. Step 3: Attach SEAT BOTTOM (#33) to SEAT FRAME (#23) with 4 ALLEN BOLTS 45mm (#22) and 4 WASHERS (#15). Tighten Bolts.
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 10
    Assembly Stage #3 Assemble Seat Back and Magazine Rack Assembly hardware required: (4) M8 Allen Bolts 16 mm long (item #5) (5) M8 Allen Bolts 35 mm long (item #25) (4) Flat Washer Ø8* Ø 16*2T(item #15) (1) Flat Washer Ø25.4 x 2T (item # 27) Step 4: Attach BACKER SLIDER TUBE (#29) to SEAT FRAME (#
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 11
    Assembly Stage #4 Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5) (4) Flat Washers Ø8 * Ø16 * 2T (item#15) (2) Flat Head Screw (item #12) Step 6: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2 FLAT HEAD
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 12
    from the right pedal. Counterclockwise rotation tightens while Clockwise rotation loosens on the left pedal. To avoid stripping of the threads be careful to use the proper pedal. Attach PEDAL STRAPS (#18) to each PEDAL (#14). Again, each strap is labeled with an R or an L corresponding to the right
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 13
    Assembly Stage #6 Attach Seat Rail to Main Unit Assembly Hardware Required: (3) Allen Bolts 16 mm long (item #5) (3) Flat Washers (item #15) Step 11: Attach the SEAT RAIL HR WIRE (#19) to the LOWER HR WIRE (#10). Carefully slide the seat rail assembly onto the receiver on the MAIN UNIT (#13).
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 14
    Assembly Stage #7 Attach Handlebar Assembly and Run Cabling Through Handlebar Post Assembly Hardware Required: NONE Step 12: Slide the HANDLEBAR ASSEMBLY (#2) into the receiver on the HANDLEBAR POST (#4). Slide the threaded post into the slider tube and attach the HANDLEBAR ASSEMBLY SLIDER TUBE
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 15
    Assembly Stage #8 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5) (4) Curved Washers (item #6) (4) Computer Screws (item #3) Step 14: Before sliding the HANDLEBAR
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 16
    extension. That's it! You're finished and now you can begin to reach your fitness goals! Please reference the Owner's Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines. Schwinn Customer Service 1.800.864.1270
  • Schwinn 213 Recumbent Bike | Assembly Manual - Page 17
    Troubleshooting the Schwinn 213 Recumbent Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Computer will not start, function, or is blank... (SOLUTION): 1. Ensure the batteries the unit is plugged into a 110v outlet. 2. Check the wiring connections and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
213 Schwinn
®
Recumbent Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions