Schwinn 213 Recumbent Bike Assembly Manual - Page 10
Assembly Stage #3, Assemble Seat Back and Magazine Rack - racks
 |
View all Schwinn 213 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Assembly Stage #3 Assemble Seat Back and Magazine Rack Assembly hardware required: (4) M8 Allen Bolts 16 mm long (item #5) (5) M8 Allen Bolts 35 mm long (item #25) (4) Flat Washer Ø8* Ø 16*2T(item #15) (1) Flat Washer Ø25.4 x 2T (item # 27) Step 4: Attach BACKER SLIDER TUBE (#29) to SEAT FRAME (#23) with 4 ALLEN BOLTS 16mm (#5) and 4 WASHERS (#15). Tighten bolts. Step 5: Attach the SEAT BACK (#28) and SEAT BACKER (#24) to the SEAT FRAME (#23) with 5 Allen Bolts (#25), ADJUSTMENT KNOB (#26), and the FLAT WASHER (#27). Tighten bolts. Note: Finished seat should look like picture below:
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
 |
 |
Assembly Stage #3
Assemble Seat Back and Magazine Rack
Assembly hardware required:
(4) M8 Allen Bolts 16 mm long (item #5)
(5) M8 Allen Bolts 35 mm long (item #25)
(4) Flat Washer Ø8*
Ø 16*2T(item #15)
(1) Flat Washer Ø25.4 x 2T (item # 27)
Step 4:
Attach BACKER SLIDER TUBE (#29) to SEAT FRAME (#23) with 4 ALLEN
BOLTS 16mm (#5) and 4 WASHERS (#15).
Tighten bolts.
Step 5:
Attach the SEAT BACK (#28) and SEAT BACKER (#24) to the SEAT FRAME
(#23) with 5 Allen Bolts (#25), ADJUSTMENT KNOB (#26), and the FLAT WASHER
(#27).
Tighten bolts.
Note:
Finished seat should look like picture below: