Schwinn 222 Recumbent Bike Assembly Manual

Schwinn 222 Recumbent Bike Manual

Get Schwinn 222 Recumbent Bike PDF manuals and user guides View all Schwinn 222 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn 222 Recumbent Bike manual content summary:

  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 1
    222 Schwinn® Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 2
    on the computer console mast of the exercise bike. Failure to follow any of these safeguards may result in injury or serious health problems. • Read and understand the Owner's Manual and operation instructions prior to use. If you do not have an Owner's Manual, call 1-800-864-1270 to obtain one
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 3
    . This is to ensure adequate clearance for easy access to the bike and to avoid any possible contact with the moving pedals 222 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions Assembly of the 222 Recumbent Bike is divided into 5 easy stages; each comprised of only a few
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 4
    1 1 1 1 1 1 8 1 1 1pr 8 1 Parts List Description Computer Handlebars Computer Screws Handlebar Post Allen Bolt 8x1.25x16L Seat Handlebar Seat Adjustment Knob Small Flat Washer Seat Bottom Allen Bolt 8x1.25x45L Seat Support Frame Seat Back Bottle Holder Screw 5x14L AC Adaptor Reference # 1 2 3
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 5
    Flat Washer ? 8*? 16*2T Allen Bolt M8xP1.25x16mm Screws M8xP1.25x16mm Flat Washer ? 8*? 16*2T Screwdriver Allen Key Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 6
    222 Assembly Drawing with Reference Numbers
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 7
    Rear Stabilizer Seat Rail Seat Rail HR Wire Seat Handlebar Small Flat Washer Seat Bottom Allen Bolt 8x1.25x45L Seat Support Frame Seat Back Bottle Holder Screw 5x14L AC Adaptor Part # 18165 18200 18094 18197 18001 18098 18086 18085 18064 18190 18219 18255 18101 18199 18192 18080 18082 18207 18140
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 8
    and parts with the enclosed parts list and full size hardware chart. Each step of the assembly process has been broken down into 6 easy-to-follow stages. Please take just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 9
    Step 3: Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Step 4: Attach SEAT BACK (#27) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Note: Finished seat should look like picture below:
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 10
    Assembly Stage #2 Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5) (4) Flat Washers Ø8 * Ø16 * 2T (item#15) (2) Flat Head Screws (item #12) Step 5: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2 FLAT HEAD
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 11
    from the right pedal. Counterclockwise rotation tightens while Clockwise rotation loosens on the left pedal. To avoid stripping of the threads be careful to use the proper pedal. Attach PEDAL STRAPS (#18) to each PEDAL (#14). Again, each strap is labeled with an R or an L corresponding to the right
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 12
    Assembly Stage #4 Attach Seat Rail to Main Unit Assembly Hardware Required: (3) Allen Bolts 16 mm long (item #5) (3) Flat Washers (item #15) Step 10: Attach the SEAT RAIL HR WIRE (#19) to the LOWER HR WIRE (#10). Carefully slide the seat rail assembly onto the receiver on the MAIN UNIT (#13).
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 13
    ASSEMBLY STAGE #5 Attach Handlebar Assembly and Run Cabling Through Handlebar Post Assembly Hardware Required: NONE Step 11: Slide the HANDLEBAR ASSEMBLY (#2) into the receiver on the HANDLEBAR POST (#4). Slide the threaded post into the slider tube and attach the HANDLEBAR ASSEMBLY SLIDER TUBE
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 14
    Assembly Stage #6 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5) (4) Curved Washers (item #6) (4) Computer Screws (item #3) Step 13: Before sliding the HANDLEBAR POST (#4) onto the MAIN UNIT (#13), attach both HR CABLES (#7 & #10) as well as the
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 15
    (#2), the reading rack should wrap around the wall and into the recumbent bike. The POWER PLUG (#72) on the bike is located at the Manual for information regarding computer operation, product maintenance, warranty information, and general fitness and exercise guidelines. Schwinn Customer Service
  • Schwinn 222 Recumbent Bike | Assembly Manual - Page 16
    Troubleshooting the Schwinn 222 Recumbent Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Computer will not start, function, or is blank... (SOLUTION): 1. Ensure the batteries the unit is plugged into a 110v outlet. 2. Check the wiring connections and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
222 Schwinn
®
Recumbent Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions