Schwinn 222 Recumbent Bike Assembly Manual - Page 14
Assembly Stage #6, Attach Console Mast to Main Unit
View all Schwinn 222 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Assembly Stage #6 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5) (4) Curved Washers (item #6) (4) Computer Screws (item #3) Step 13: Before sliding the HANDLEBAR POST (#4) onto the MAIN UNIT (#13), attach both HR CABLES (#7 & #10) as well as the COMPUTER CABLE (#8 & #9). Slide the HANDLEBAR POST (#4) onto the MAIN UNIT (#13). Fasten with 4 BOLTS (#22) and 4 CURVED WASHERS (#19). Tighten with provided Allen wrench.
Assembly Stage #6
Attach Console Mast to Main Unit
Assembly Hardware Required:
(4) Allen Bolts 16 mm long (item #5)
(4) Curved Washers (item #6)
(4) Computer Screws (item #3)
Step 13:
Before sliding the HANDLEBAR POST (#4) onto the MAIN UNIT (#13),
attach both HR CABLES (#7 & #10) as well as the COMPUTER CABLE (#8 & #9).
Slide the HANDLEBAR POST (#4) onto the MAIN UNIT (#13).
Fasten with 4 BOLTS
(#22) and 4 CURVED WASHERS (#19).
Tighten with provided Allen wrench.