Schwinn 270 Recumbent Bike 2017 model Assembly and Owner s Manual - Page 44
Seat Assembly shifts
View all Schwinn 270 Recumbent Bike 2017 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Condition/Problem Unit rocks/does not sit level Pedals loose/unit difficult to pedal Clicking sound when pedaling Seat Assembly shifts / squeaks when in use Things to Check Solution Check leveler adjustment Adjust levelers until machine is level. Check surface under unit Check pedal to crank connection Check crank to axle connection Check pedal to crank arm connection Hardware Adjustment may not be able to compensate for extremely uneven surfaces. Move machine to level area. Pedal should be tightened securely to crank. Be sure connection is not cross threaded. Crank should be tightened securely to axle. Be sure cranks are connected at 180 degrees from each other. Remove pedals. Make sure there is no debris on threads, and reinstall the pedals Check hardware that attaches Seat assembly, and fully tighten hardware. 44