Schwinn A15 Upright Bike Assembly and Owner's Manual - Page 10
Install Handlebars on Console Mast
View all Schwinn A15 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Install Handlebars on Console Mast Note: Hardware is pre-installed on Console Mast and not on Hardware Card. NOTICE: M ake sure the Handlebar Bracket has an equal distance between the two ends of the bracket and the bracket mount on the Console Mast. Do not crimp the cables. Route the HR cable through the side hole in the mast to the top of the mast. Push the grommet on the cable into the hole to keep the HR cable in position. 9 = X2 = 6mm 10
10
5. Install Handlebars on Console Mast
Note:
Hardware is pre-installed on Console Mast and not on Hardware Card.
NOTICE:
Make sure the Handlebar Bracket has an equal distance between the two ends of the bracket and the
bracket mount on the Console Mast.
Do not crimp the cables. Route the HR cable through the side hole in the mast to the top of the mast. Push
the grommet on the cable into the hole to keep the HR cable in position.
X2
6mm
9
=
=