Schwinn A15 Upright Bike Assembly and Owner's Manual - Page 9
Attach Seat to Seat Post and Frame, Install Console Mast on Main Assembly
View all Schwinn A15 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Attach Seat to Seat Post and Frame Note: H ardware is pre-installed on Seat and not on Hardware Card. NOTICE: T he Adjustment Knob is pre-installed on the Main Frame. Make sure the Adjustment Knob engages the Seat Post. ! Do not set the Seat Post position higher than the stop mark (MAX) on the tube. X3 4 5 4. Install Console Mast on Main Assembly NOTICE: A lign the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable. X4 7 D B 6mm 9
9
3. Attach Seat to Seat Post and Frame
Note:
Hardware is pre-installed on Seat and not on Hardware Card.
NOTICE:
The Adjustment Knob is pre-installed on the Main Frame. Make sure the Adjustment Knob engages the Seat
Post.
!
Do not set the Seat Post position higher than the stop mark (MAX) on the tube.
5
4
X3
4. Install Console Mast on Main Assembly
NOTICE:
Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable.
X4
B
D
6mm
7